Miele G 858 SCVI, G 658 SCVI Cleaning the water inlet filter, Installing an in-line water filter

Page 52

Cleaning and Care

Cleaning the water inlet filter

A filter is incorporated in the intake hose attached to the dishwasher’s shut off valve. If your water is hard, or the pipes contain sediment, this filter may clog and prevent enough water from entering the wash cabinet.

Installing an in-line water filter

^If your water contains a large number of insoluble substances, a filter between the water valve and the intake hose connection is recommended. These filters can be purchased from Miele’s Technical Service Department.

,The plastic valve housing on the intake hose contains electrical components and should not be immersed, or run through water.

Cleaning the filter:

^Disconnect the dishwasher from electricity (unplug it or "trip" the circuit breaker).

^Turn off the water valve.

^Unscrew the intake hose.

^Carefully remove the rubber seal.

^Remove the filter using a needle nose plier and rinse under running water.

^Return the filter and seal. Make sure they are seated correctly.

^Screw the intake hose back on the water valve, checking that it is not cross-threaded.

^Slowly turn on the valve and test for leaks.

52

Image 52

Contents Operating instructions Incognito SCVi Contents Delay start d Electrical safety InstallationUse Disposal of an appliance For dishwashers with visible heating elementConsignes DE Sécurité Importantes Avertissement Sécurité électriqueConsignes DE Sécurité Importantes Mise au rebut de l’appareil UtilisationLave-vaisselle munis d’un élément chauffant visible Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel Before using for the first time To open the doorTo close the door Pull the handleWater softener 12 gr/gal Programming the water softenerGr/gal Ppm Button 13 70 gr/gal Checking the programmed water hardnessFilling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Do not rinse dishesGlassware Items not recommended for dishwashingSilver and aluminum Cutlery tray SC units Upper basket Adjusting the upper basketSlide out the upper basket Adjustable cup racks Coffee bar Lower basket Dishwasher with cutlery tray Height limitRemoving an insert Lower basket insertsInserting an insert Foldable spike insert Foldable spikesPlateGuard Plus insert Vase / Bottle holderBasket accessories Operation Adding detergentOperation Running the dishwasherWaterproof System At the end of a programInterrupting a program Changing a programProgram When to use Program cycle Program guideAdditional features Top SoloDelay start d To start a program before the delay start period has elapsed Frequently asked questions What if … Possible fault FixOptic indicator does Shortly after starting aProgram, the dishwasher Stops runningIndicator Program indicatorsAfter a program has Ended, the opticDishes are not clean? Tea or lipstick stains Have not beenCompletely removed? White residue is visiblePlastics are discolored? There are rust stains onCutlery? Detergent dispenserAfter sales service Program update function PCTransport Page User Maintenance Instructions Cleaning the filter in the wash cabinet Cleaning and CareTriple filter system Cleaning and Care Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Page Page Alterations rights reserved / G 851 Plus