Miele G 858 SCVI After a program has, Ended, the optic, Indicator, Program indicators, Flash?

Page 40

Frequently asked questions

What if …	Possible fault	Fix
after a program has	There may be a technical	– Turn the dishwasher off.
ended, the optic	fault.	Despite the problem the
indicator and the		dishwasher can be used.
program indicators		If the indicators flash
flash?		again after the next
		program cycle, call the
		Miele Technical Service
		Department.
there is a knocking	The spray arm is hitting	Interrupt the program,
noise in the wash	an item in the basket.	rearrange items blocking
cabinet?		the spray arms.
there is a rattling noise?	Items are not secure in	Interrupt the program and
	the wash cabinet.	rearrange loose pieces.
there is a knocking	This may be caused by	This has no effect on the
noise in the water	the installation or the	dishwasher. If in doubt
pipes?	diameter of pipe.	contact a plumber.
dishes are not dry,	The rinse aid setting may	Increase the dosage or
glasses and cutlery are	be too low, or the rinse aid	refill the reservoir, see
spotted?	reservoir is empty.	"Before using for the first
		time".
	Dishes were taken out too	Leave dishes in longer.
	soon.

40

Image 40

Contents Operating instructions Incognito SCVi Contents Delay start d Electrical safety InstallationUse Disposal of an appliance For dishwashers with visible heating elementConsignes DE Sécurité Importantes Avertissement Sécurité électriqueConsignes DE Sécurité Importantes Mise au rebut de l’appareil UtilisationLave-vaisselle munis d’un élément chauffant visible Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel Before using for the first time To open the doorTo close the door Pull the handleWater softener 12 gr/gal Programming the water softenerGr/gal Ppm Button 13 70 gr/gal Checking the programmed water hardnessFilling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Do not rinse dishesGlassware Items not recommended for dishwashingSilver and aluminum Cutlery tray SC units Upper basket Adjusting the upper basketSlide out the upper basket Adjustable cup racks Coffee bar Lower basket Dishwasher with cutlery tray Height limitRemoving an insert Lower basket insertsInserting an insert Foldable spike insert Foldable spikesPlateGuard Plus insert Vase / Bottle holderBasket accessories Operation Adding detergentOperation Running the dishwasherWaterproof System At the end of a programInterrupting a program Changing a programProgram When to use Program cycle Program guideAdditional features Top SoloDelay start d To start a program before the delay start period has elapsed Frequently asked questions What if … Possible fault FixOptic indicator does Shortly after starting aProgram, the dishwasher Stops runningIndicator Program indicatorsAfter a program has Ended, the opticDishes are not clean? Tea or lipstick stains Have not beenCompletely removed? White residue is visiblePlastics are discolored? There are rust stains onCutlery? Detergent dispenserAfter sales service Program update function PCTransport Page User Maintenance Instructions Cleaning the filter in the wash cabinet Cleaning and CareTriple filter system Cleaning and Care Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Page Page Alterations rights reserved / G 851 Plus