Miele G 858 SCVI, G 658 SCVI Frequently asked questions, What if … Possible fault Fix

Page 38

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.

,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

What if …

Possible fault

Fix

the dishwasher does not

The door is not properly

Close the door firmly.

start?

closed.

 

 

The machine is not

Insert the plug.

 

plugged in.

 

 

The fuse is defective or

Reset the circuit breaker.

 

the breaker has tripped.

Make sure it is a 15 A

 

 

circuit breaker.

 

The dishwasher is not

Press "On", select

 

turned on.

program.

 

No program is selected.

Select a program with

 

 

the program selection

 

 

buttons.

 

 

 

the dishwasher stops

The fuse or breaker has

Reset the circuit breaker.

during a program?

tripped.

Make sure it is a 15 A

 

 

circuit breaker.

the dishwasher stops

Water intake error.

– Turn off the dishwasher.

running, shortly after

The "Intake / Drain"

– Open the water valve.

starting a program and

indicator flashes / lights.

– Clean the water inlet

the optic indicator

 

 

filter, see maintenance

flashes?

 

 

instructions.

 

 

 

 

The waterproof system

 

 

has activated.

 

 

– Call the Miele Technical

 

 

Service Department.

38

Image 38
Contents Operating instructions Incognito SCVi Contents Delay start d Electrical safety InstallationUse Disposal of an appliance For dishwashers with visible heating elementConsignes DE Sécurité Importantes Avertissement Sécurité électriqueConsignes DE Sécurité Importantes Lave-vaisselle munis d’un élément chauffant visible UtilisationMise au rebut de l’appareil Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel To close the door Before using for the first timeTo open the door Pull the handleWater softener Gr/gal Ppm Button Programming the water softener12 gr/gal 13 70 gr/gal Checking the programmed water hardnessFilling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Do not rinse dishesSilver and aluminum Items not recommended for dishwashingGlassware Cutlery tray SC units Slide out the upper basket Adjusting the upper basketUpper basket Adjustable cup racks Coffee bar Lower basket Dishwasher with cutlery tray Height limitInserting an insert Lower basket insertsRemoving an insert Foldable spike insert Foldable spikesPlateGuard Plus insert Vase / Bottle holderBasket accessories Operation Adding detergentWaterproof System OperationRunning the dishwasher At the end of a programInterrupting a program Changing a programProgram When to use Program cycle Program guideAdditional features Top SoloDelay start d To start a program before the delay start period has elapsed Frequently asked questions What if … Possible fault FixProgram, the dishwasher Optic indicator doesShortly after starting a Stops runningAfter a program has IndicatorProgram indicators Ended, the opticDishes are not clean? Completely removed? Tea or lipstick stainsHave not been White residue is visibleCutlery? Plastics are discolored?There are rust stains on Detergent dispenserAfter sales service Program update function PCTransport Page User Maintenance Instructions Triple filter system Cleaning and CareCleaning the filter in the wash cabinet Cleaning and Care Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Page Alterations rights reserved / G 851 Plus