Miele G 842 PLUS End, Start, Top Solo indicators, Flash at the same time at, End of a program?

Page 36

Frequently asked questions

What if …

Possible fault

Fix

the "End", "Start" and

There may be a technical

– Turn the program selec-

"Top Solo" indicators

fault.

tor to ‘Stop".

flash at the same time at

 

– Turn off the dishwasher.

the end of a program?

 

A few seconds later:

 

 

 

 

– Turn the dishwasher on.

 

 

– Select the desired pro-

 

 

gram.

 

 

– Press the "Start" button.

 

 

If the indicators flash

 

 

again, there is a technical

 

 

problem.

 

 

– Call the Miele Technical

 

 

Service Department.

there is a knocking

The spray arm is hitting

Interrupt the program, re-

noise in the wash cabi-

an item in the basket.

arrange items blocking

net?

 

the spray arms.

there is a rattling noise?

Items are not secure in

Interrupt the program and

 

the wash cabinet.

rearrange loose pieces.

there is a knocking

This may be caused by

This has no effect on the

noise in the water

the installation or the di-

dishwasher. If in doubt

pipes?

ameter of pipe.

contact a plumber.

dishes are not dry,

The rinse aid setting may

Increase the dosage or

glasses and cutlery are

be too low, or the rinse aid

refill the reservoir, see "Be-

spotted?

reservoir is empty.

fore using for the first

 

 

time".

 

Dishes were taken out too

Leave dishes in longer.

 

soon.

 

36

Image 36
Contents Operating instructions Novotronic Plus SC Plus Contents Changing a program Program guide Electrical safety InstallationUse Disposal of an appliance For dishwashers with visible heating elementConsignes DE Sécurité Avertissement Sécurité électriqueConsignes DE Sécurité Utilisation Mise au rebut de l’appareilLave-vaisselle munis d’un élément chauffant visible Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel Before using for the first time To open the doorTo close the door Water softener Programming the water softener ExampleChecking the programmed water hardness Filling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Do not rinse dishesItems not recommended for dishwashing GlasswareSilver and aluminum Cutlery basket Cutlery tray SC units Adjusting the upper basket Upper basketSlide out the upper basket Adjustable cup racks Coffee bar Lower basket Dishwasher with cutlery tray Dishwasher with cutlery basketHeight limit Foldable spikesVase / Bottle holder select models Basket accessories Operation Adding detergentProgram sequence indicator Running the dishwasherWaterproof System At the end of a program Interrupting a programChanging a program Program When to use Program cycle Program guideFrequently asked questions What if … Possible fault FixDrain indicator Flashes, the programStops? Top Solo indicators End, StartFlash at the same time at End of a program?Dishes are not clean? Tea or lipstick stainsHave not been com Pletely removed?Glasses are dull and dis Colored and film cannotPlastic items are discol Ored?After sales service Program update function PCTransport User Maintenance Instructions Cleaning the filter in the wash cabinet Triple filter systemPage Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Alterations rights reserved