LED Indicators
FRONT LED | SOLUTION |
(near IR sensor) |
|
|
|
Off | • The monitor is powered off. Press the Power button on the remote or keypad. If that does |
| not work: 1) verify the power cord is properly connected to the power outlet and to the |
| monitor; 2)verify that the power switch on the back of the unit is turned on; 3) plug another |
| electrical device to the power outlet to verify that the outlet is supplying the proper voltage. |
|
|
Off | • The monitor is in standby mode. Press the Power button on the remote or keypad. |
|
|
White | • The monitor is powered on. |
|
|
Orange | • Contact InFocus Support at www.infocus.com/support. |
|
|
For additional troubleshooting support, please contact:
InFocus Corporation - Technical Support
www.infocus.com/support
INF7001a Hardware Guide | Page 23 |
