Miele KM 92-2, KM82-2 manual Cleaning and care, Burners, Burner trim, Cooktop surface

Page 13

Cleaning and care

To prevent spills from burning on to the cooktop, clean the burners and cook- top surface immediately in the event of a spill.

Burners

Make sure no moisture or soil pene- trates inside the burners. Wipe off any spilt food with a damp cloth once the burners have cooled. Use a plastic scouring pad if necessary for stubborn spills. The burners can be scoured, but not the rim or cooktop surface.

Remove any residue from the burners after cleaning.

To dry the burners turn them on for a short time.

It is important that they are dry in order to prevent rust from forming.

Occasional treatment with a thin film of oil, or a special cleaner for solid burner plates is recommended.

Burner trim

Do not use abrasive cleaners to clean the trim. Clean the trim using an appropriate metal or stainless steel cleaner.

Cooktop surface

Avoid spilling liquids or foods con- taining salt onto the stainless steel cooktop. Should this occur, wipe up any spills immediately.

Otherwise discoloration of the steel could occur.

Remove dust, oils and fats, food spills or condensed water from pots and pans immediately to prevent them from drying on. Dried-on food residues are easier to remove if they are first soft- ened with hot water.

Clean the cooktop surface using hot water and dishwashing liquid.

Do not use scouring agents or pads, knives or hard brushes. These will scratch the surface of the cooktop.

Do not use cleaners containing acids. A stainless steel cleaner can be used on the cooktop surface.

Control panel / Control knobs

Do not use any scouring agents or pads on the knobs or control panel.

Clean the cooktop controls and control panel with hot water and dishwashing liquid.

After cleaning, rub dry with a soft cloth.

13

Image 13
Contents Electric cooktops KM 82-2, KM Description of the appliance Data plate AccessoriesContents Disposal of your old machine Disposal of packagingPage Page Before using for the first time Recommended settings Burner description Safety thermostatTurning on the burners Burner operationAfter cooking Following tips are designed to en- able you to Burners Cleaning and careBurner trim Cooktop surfaceWhat to do if Resistance is felt between set- tings 7 and 8? Problem solving guideAfter Sales Service Electrical connection Also, see the circuit diagram pro- vided with the applianceThis appliance must be grounded For CDN only Miele Fuse Box Measurement Conversion Table Inches Appliance dimensionsInstallation instructions Zone Combiset Place the provided seal f under the edge of the cooktop Installation instructions Page Alteration rights reserved CDN, USA

KM 92-2, KM82-2 specifications

The Miele KM82-2 and KM92-2 are premium induction cooktops that exemplify Miele's commitment to quality, precision, and innovation in kitchen appliances. Renowned for their sleek design and advanced technology, these cooktops cater to both amateur and professional chefs, allowing for an unparalleled cooking experience.

One of the standout features of both the KM82-2 and KM92-2 is their induction technology. Induction cooking uses electromagnetic energy to directly heat pots and pans, resulting in quicker cooking times and increased energy efficiency. This technology not only heats the cookware but also maintains a cooler cooking surface, enhancing safety by reducing the risk of burns.

Both models incorporate Miele’s intuitive TouchControl operation, which allows users to easily adjust heat levels and settings with a simple touch. This user-friendly interface gives chefs precise control over cooking temperatures, enabling them to achieve perfect results every time. With power levels ranging from gentle simmering to high heat, these induction cooktops offer versatility for various culinary techniques.

A highlight of the KM82-2 and KM92-2 is their generous cooking surface. With multiple induction zones, including a large, flexible cooking area, these models can accommodate different pot sizes and shapes, making them ideal for preparing multiple dishes simultaneously. The integrated TwinBooster feature maximizes cooking power by allowing two induction zones to work together, which is particularly useful for larger cookware.

Safety is a priority with Miele’s induction cooktops. Both models feature an automatic shut-off function, which activates after a period of inactivity, preventing potential accidents. Additionally, the cooktops come equipped with a child safety lock, ensuring that younger family members cannot accidentally turn on the appliance.

Another key characteristic of the KM82-2 and KM92-2 is their easy-to-clean surface. The smooth, glass-ceramic surface prevents food from sticking, allowing for effortless wiping and maintenance. Miele’s commitment to durability means that both models are built to withstand the rigors of daily cooking.

In conclusion, the Miele KM82-2 and KM92-2 induction cooktops combine cutting-edge technology with a focus on user convenience and safety. Their superior features, such as rapid heating, energy efficiency, flexible cooking zones, and easy maintenance, make them an exceptional choice for anyone seeking to elevate their cooking experience.