Guide to the display
Triangle in the display
When a control is touched, the symbols of functions which can be altered will light up in the display. These will vary depending on program.
Touch the "" or "" control repeatedly until triangle is underneath the symbol of the required function.
Then select the function using the "OK" control.
Triangle will flash for approx.
15 seconds.
You can only make entries with the "" or "" controls while the triangle
is flashing.
If the triangle has stopped flashing, you will need to select the function again with the "OK" control.
The following will change each time "" or "" is touched
–Duration "" and End time "" in increments of a minute,
–the Timer "" at first in increments of 5 seconds and then in increments of a minute.
Touching the control for longer, speeds up the change in the display.
325
11