IMPORTANT SAFETY INSTRUCTIONS
Installation
Before installation, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent injury and machine damage. Consult a qualified electrician if in doubt.
Be certain your appliance is properly installed and grounded by a qualified technician.
To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.
Oven use
WARNING: Ovens can produce high temperatures that can cause burns.
Prevent children from touching the appliance while in use.
Use
To prevent burns, always place oven racks at their desired height while the oven is cool.
Open the door carefully to allow hot air or steam to escape before placing or removing food.
The oven is not to be operated until it has been properly installed within cabinetry.
Installation, maintenance and repair work should be performed by an authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.
Before installation or service,
disconnect the power supply to the work area by removing the fuse, "tripping" the circuit breaker, or shutting off the power main.
To prevent burns, allow the heating element to cool before cleaning by hand.
During the self cleaning function the oven will become very warm. Prevent children from coming in contact with the oven.
Remove all accessories from the oven before starting the self cleaning function. The high temperatures needed for this program will damage the accessories.
The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.
Only clean parts listed in this manual.
5