Installation
Installation |
| |
Make sure power is not supplied to |
| |
the appliance while installation or |
| |
maintenance work is performed. |
| |
Disconnect the power supply to the |
| |
work area by unplugging the unit, |
| |
tripping the circuit breaker or |
| |
removing the fuse. The coffee |
| |
system must be properly installed |
| |
before being used. |
| |
^ Plug the appliance into the electrical | ^ Open the door and partially tighten | |
the screws by hand. Do not use an | ||
outlet. | electric screwdriver. | |
^ If you have a cabinet with 3/4" | ^ Carefully turn the lower screws to | |
(19 mm) side panels, you will need to | center the machine. | |
drill four holes first. | ^ To fix the machine in the cabinet, | |
– Center the machine in the | ||
tighten the upper screws. | ||
cabinet. | ||
| ||
– Tighten the screws just so they |
| |
leave a mark in the panel. |
| |
– Remove the machine from the |
| |
cabinet and drill four holes 1/16" |
| |
(2 mm) with a diameter of 3/16" |
| |
(4.5 mm). |
|
^Level the machine with the four
height adjustable feet.
The feet can be turned out up to 3/8" (10 mm).
^Push the appliance all the way back into the cabinet.
61