First steps to use
Before using the coffee system for the first time
1. Clean the parts
^Hand wash the coffee capsule plate with hot water and liquid dish soap.
^The water tank can be washed in the dishwasher.
2. Fill the water tank
^Open the appliance door.
^Lift the water tank and pull it out.
^Fill the container with fresh, cold tap water to the "Max." mark. Push the water tank back into the machine.
3. Fill the system with water
HOT WATER
K1 2 3 4 5 L o n G k C
^Set a cup under the steam valve.
^Turn the left jog shuttle to "Hot water".
^Press the right jog shuttle.
The steam valve dispenses hot water.
^Press the right jog shuttle again to turn the hot water off.
^Turn the left jog shuttle to "Heating with steam".
^Press the steam lever down.
^Push the steam lever up when steam starts to be dispensed.
The lines are filled and the coffee system is ready to use.
4. Rinse the lines
RINSE
K1 2 3 4 5 L o n G k C
^Turn the left jog shuttle to "Rinse".
^Press the right jog shuttle.
Water runs from the coffee dispenser.
^Press the steam lever down. Water runs from the steam valve.
^Push the steam lever up after a few seconds.
12