Miele FN 12220 S, FN 12420 S, FN 12620 S Temperature display will flash if

Page 14

The correct temperature

Temperature display

The temperature display on the control panel always shows the required temperature.

The temperature can be adjusted from: -15 °C to -32 °C

The temperature display will flash if

–the temperature in the appliance is not within the possible temperature range,

–a different temperature is being set,

–the temperature in the appliance has risen by several degrees, indicating that the appliance is warming up too much.

This loss of coldness is no cause for concern in the following circumstances:

–when the door has been left open for a while, e.g. for removing or storing a large amount of food,

–when fresh food is being frozen.

However, if the temperature in the freezer section remains above -18 °C for a long time, check that the frozen food has not started to defrost. If it has started thawing, check that the food is safe to use and if it is, use it as quickly as possible.

14

Image 14

Contents En GB Contents Contents Guide to the appliance Disposal of your old appliance Caring for the environmentDisposal of the packing material Safety with children Correct applicationTechnical safety Page Correct use Disposal of your old appliance How to save energy Normal energy Increased energy ConsumptionSwitching on and off Correct temperature Setting the temperatureTemperature display Temperature display will flash ifActivating the alarm system AlarmDoor alarm Switching the alarm off earlySuper freeze Switching on Super freezeSwitching off Super freeze Super freeze is not necessaryFreezing fresh food Freezing and storing foodMaximum freezing capacity Isolation plateStoring frozen food ExamplePacking Home freezingHints on home freezing Unsuitable packing materialBefore placing food in the freezer Freezing large itemsDefrosting Placing food in the freezerFreezer tray Ice cubesCooling drinks Cool pack Defrosting Cleaning the outer casing, the interior and accessories Cleaning and careBefore cleaning Ventilation gapsAfter cleaning Metal grille at the back of the applianceAppliance is switching in too frequently and for too long Problem solving guideTemperature inside the appliance is too low What to do if Appliance does not get coolAlarm sounds and the alarm indicator light flashes Food has frozen togetherNoises Normal noises What causes themAfter Sales / Guarantee GuaranteeElectrical connection U.K Non-rewireable plugs BSElectrical connection Location InstallationInstallation VentilationAligning the appliance FN 12420 S Appliance dimensionsFN 12220 S FN 12620 SChanging the door hinging Removing the door handleChanging over the door Open the appliance door Changing the door hinging Refitting the handle Building in the appliance