Miele FN 12620 S, FN 12420 S, FN 12220 S Installation, Location, Ventilation, Climate range

Page 31

Installation

Do not place any appliance which gives off heat, such as a toaster or microwave oven, on top of this appliance, as this would increase the appliance's energy consumption.

This appliance must not be installed directly next to another refrigerator or freezer.

It does not have side-wall heating, so installation next to another refrigerator or freezer could cause a build-up of condensation between them.

Further information is available from your dealer.

Location

This appliance should be installed in a dry, well-ventilated room. It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator. The room temperature should not go above or below the climate range for which the appliance is designed. The higher the ambient temperature of the room, the more energy the appliance requires to operate.

Climate range

The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range of the appliance is stated on the data plate inside the appliance.

Climate range

Ambient room

 

temperature

 

 

SN

+10°C to +32°C

N

+16°C to +32°C

ST

+16°C to +38°C

T

+16°C to +43°C

SN-ST

+10°C to +38°C

SN-T

+10°C to +43°C

 

 

The appliance will function perfectly down to an ambient temperature of +5 °C.

Ventilation

Air at the back of the appliance gets warm. To ensure sufficient ventilation, the ventilation gaps must not be covered over. The air inlet and outlet must not be covered or blocked in any way. They should be dusted on a regular basis.

Installation

^Remove the cable clip from the back of the appliance.

^Check that all parts at the back of the appliance are unhindered. Carefully remove any hindrance.

^Carefully push the appliance into position

^with the back against the wall.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents En GB Contents Contents Guide to the appliance Disposal of the packing material Caring for the environmentDisposal of your old appliance Correct application Safety with childrenTechnical safety Page Correct use Disposal of your old appliance Normal energy Increased energy Consumption How to save energySwitching on and off Setting the temperature Correct temperatureTemperature display will flash if Temperature displaySwitching the alarm off early AlarmDoor alarm Activating the alarm systemSuper freeze is not necessary Switching on Super freezeSwitching off Super freeze Super freezeIsolation plate Freezing and storing foodMaximum freezing capacity Freezing fresh foodExample Storing frozen foodUnsuitable packing material Home freezingHints on home freezing PackingPlacing food in the freezer Freezing large itemsDefrosting Before placing food in the freezerCooling drinks Ice cubesFreezer tray Cool pack Defrosting Ventilation gaps Cleaning and careBefore cleaning Cleaning the outer casing, the interior and accessoriesMetal grille at the back of the appliance After cleaningWhat to do if Appliance does not get cool Problem solving guideTemperature inside the appliance is too low Appliance is switching in too frequently and for too longFood has frozen together Alarm sounds and the alarm indicator light flashesNormal noises What causes them NoisesGuarantee After Sales / GuaranteeElectrical connection Non-rewireable plugs BSElectrical connection U.K Ventilation InstallationInstallation LocationAligning the appliance FN 12620 S Appliance dimensionsFN 12220 S FN 12420 SRemoving the door handle Changing the door hingingChanging over the door Open the appliance door Changing the door hinging Refitting the handle Building in the appliance
Top Page Image Contents