Changing the door hinging
Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below.
^ Open the appliance door. |
^Remove cover a by hand, and remove cover b using a screwdriver.
^Loosen fixing screws c slightly.
^Slide the door outwards d and lift it off.
^Unscrew fixing screws c completely, and loosely screw them into the holes on the opposite side of the appliance e.
If you have put locking pins into the hinges to stop the door opening too far:
^Remove the locking pins from the top of the hinges.
To remove the soft-close mechanism
^Place the door with the outer side downwards on a stable surface.
^Open the hinges, and loosen the screw in mounting a.
Warning. The
^Unscrew ball joint b using an adjustable spanner, and remove soft- close mechanism c together with the ball joint.
36