Miele KM 6212, KM 6213, KM 6200, KM 6204, KM 6206 Safety switch-off if the sensors are covered

Page 45

Safety features

Safety switch-off

Safety switch-off if the sensors are covered

Your hob will switch off automatically if one or several of the sensors remain covered for more than about 13 seconds, for example by finger contact, food boiling over, or by an object such as an oven glove or a tea towel.

An F will flash in the timer display.

￿Clean the control panel or remove the obstruction.

F goes out, and you can now use the hob again.

Safety switch-off with an over-long cooking time

If one of the cooking zones is heated for an unusually long period of time (see chart) and the power level is not altered, the hob will switch itself off automatically and the relevant residual heat indicator will light up.

To use the cooking zone again, switch it back on in the usual way.

The appliance is delivered with 0 power levels programmed as standard. If required you can set a higher safety setting with a shorter maximum operating time (see the table).

45

Image 45
Contents En GB Page Contents After sales service, data plate Models Description of the applianceKM 6202 / KM KM 6204 / KM 6206 / KM Description of the appliance KM 6212 / KM 6213 / KM 6215 / KM Controls Timer display Indicator lightsSensors Cooking zone displaysCooking KM 6202 / KM Zone Rating Watts for Cooking zonesCooking KM 6204 / KM 6206 / KM Zone Rating in watts for 230 Cooking Zone Rating in watts for 230Description of the appliance Page Correct application Safety with children Technical safety Page Correct use Page Cleaning and care Caring for the environment Disposal of the packing materialDisposing of your old appliance Before using for the first time Cleaning for the first timeBefore using for the first time How the cooking zones work Single circle zoneDouble circle zone Operation Operating principalsException To switch the hob on Switching onSetting the power level Standard power level range Extended power level range see Power level rangeAltering the power level Power levels SettingsAuto heat-up To activate Auto heat-upTo deactivate Auto heat-up Heat-up time Cooking setting Minutes and seconds approxOuter ring of a vario/extended zone Switching on manuallyExtendedPlus zone depending on model Switching off the extended cooking areaSwitching off a cooking zone Switching off and residual heat indicatorsSwitching off the hob Residual heat indicatorMost suitable Suitable pansLess suitable Not suitableTips on saving energy Timer To set the minute minder time Minutes Minute minderHours To delete the minute minder time To change the minute minder timeTo switch a cooking zone off automatically To use both timer functions at the same time Safety lock / System lock Safety featuresTo deactivate the system lock To activate the system lockStop and Go ActivatingDeactivating Safety switch-off Safety switch-off if the sensors are coveredSafety switch-off with an over-long cooking time Min Overheating/pan protection To avoid damaging the surface of your appliance, do not use Cleaning and careCleaning and care Programming Programming Programming Problem Possible cause Remedy Hob or cooking Problem solving guideSwitched on Zones cannot beSwitched on LC Problem Possible cause Remedy After the hob isAppears in the timer Switched on dEFlashes in the timer Problem Possible cause Remedy Will flashFunction is switched Heat indicators areOver-sensitive or do not Problem Possible cause Remedy Sensors areReact at all FE flashes alternatelyTo test the power level To test the power level Cleaning products Optional accessoriesCeramic and stainless steel hob cleaner 250 ml Cloth microfibre clothMielehome system XKM 2100 KMXGW Mielehome Conctivity Signing on the hob Conctivity and MielehomeSigning off the hob Important U.K Electrical connectionWiring diagram Guarantee After sales service, data plateAlteration rights reserved Nr 140 320