Miele KM 6207, KM 6213, KM 6200, KM 6204, KM 6206, KM 6216, 6203 Stop and Go, Activating, Deactivating

Page 44

Safety features

Stop and Go

Your appliance has a Stop and Go feature which, when activated, reduces the power of all cooking zones in use to power level 1. When Stop and Go is activated, the cooking zone power levels and the setting of the timer cannot be altered and the hob can only be switched off.

When Stop and Go is deactivated, the cooking zones resume at the power level which was last set.

If Stop and Go is not deactivated, the hob switches off after 1 hour.

When Stop and Go is activated

-the countdown of a time programmed in for automatic switch-off will be interrupted. When deactivated, the time will continue to run.

-the minute minder will continue without interruption.

Activating

Touch the sensor.

The power of the cooking zones in use will be reduced to power level 1.

Deactivating

Touch the sensor.

The cooking zones will now run at the level that was previously set.

44

Image 44

Contents En GB Page Contents After sales service, data plate Description of the appliance ModelsKM 6202 / KM KM 6204 / KM 6206 / KM Description of the appliance KM 6212 / KM 6213 / KM 6215 / KM Controls Indicator lights Timer displaySensors Cooking zone displaysCooking zones Cooking KM 6202 / KM Zone Rating Watts forCooking KM 6204 / KM 6206 / KM Zone Rating in watts for 230 Cooking Zone Rating in watts for 230Description of the appliance Page Correct application Safety with children Technical safety Page Correct use Page Cleaning and care Disposing of your old appliance Caring for the environmentDisposal of the packing material Before using for the first time Before using for the first timeCleaning for the first time Double circle zone How the cooking zones workSingle circle zone Exception OperationOperating principals Switching on To switch the hob onSetting the power level Standard power level range Extended power level range see Power level rangeAltering the power level Settings Power levelsTo deactivate Auto heat-up Auto heat-upTo activate Auto heat-up Cooking setting Minutes and seconds approx Heat-up timeSwitching on manually Outer ring of a vario/extended zoneSwitching off the extended cooking area ExtendedPlus zone depending on modelSwitching off and residual heat indicators Switching off a cooking zoneSwitching off the hob Residual heat indicatorSuitable pans Most suitableLess suitable Not suitableTips on saving energy Timer Minute minder To set the minute minder time MinutesHours To change the minute minder time To delete the minute minder timeTo switch a cooking zone off automatically To use both timer functions at the same time Safety features Safety lock / System lockTo activate the system lock To deactivate the system lockDeactivating Stop and GoActivating Safety switch-off with an over-long cooking time Safety switch-offSafety switch-off if the sensors are covered Min Overheating/pan protection Cleaning and care To avoid damaging the surface of your appliance, do not useCleaning and care Programming Programming Programming Problem solving guide Problem Possible cause Remedy Hob or cookingSwitched on Zones cannot beProblem Possible cause Remedy After the hob is Switched on LCAppears in the timer Switched on dEProblem Possible cause Remedy Will flash Flashes in the timerFunction is switched Heat indicators areProblem Possible cause Remedy Sensors are Over-sensitive or do notReact at all FE flashes alternatelyTo test the power level To test the power level Optional accessories Cleaning productsCeramic and stainless steel hob cleaner 250 ml Cloth microfibre clothXGW Mielehome systemXKM 2100 KM Mielehome Conctivity Conctivity and Mielehome Signing on the hobSigning off the hob Electrical connection Important U.KWiring diagram After sales service, data plate GuaranteeAlteration rights reserved Nr 140 320