Programming
You can change the default settings of the programme options (see chart). Several settings can be altered in succession.
After selecting programming mode, P (Programme) and S (Status) will appear in the timer display. On hobs with 3 cooking zones, an additional indicator will appear at the rear left.
The programme is shown in the cooking zone displays at the front left and rear left. Example:
Programme 03 = front left 0, rear left 3 Programme 14 = front left 1, rear left 4
The status is shown in the front right cooking zone display.
To select programming mode
With the hob switched off, touch the and sensors at the same time until the safety lock indicator lamp flashes.
To set the programme
To set the units position first touch the sensor for selecting the rear left cooking zone and then touch the relevant number on the numerical keypad.
To set the tens position first touch the sensor for selecting the front left cooking zone and then touch the relevant number on the numerical keypad.
To set the status
Touch the sensor for selecting the front right cooking zone and then touch the relevant number on the numerical keypad.
To save settings
Touch the sensor until all the displays go out.
To not save settings
Touch the sensor until all the displays go out.
50