Miele KM 6208, KM 6213, KM 6200, KM 6204, KM 6206, KM 6216, 6203 Electrical connection, Important U.K

Page 65

Electrical connection

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK).

Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

A damaged cable must be replaced by a suitably qualified electrician with a special connection cable of type H 05 VV-F, available from Miele.

Ensure power is not supplied to the appliance until after installation or repair work has been carried out.

The appliance must only be operated when built-in. This is to ensure that all electrical parts are shielded. Live parts must not be exposed.

Do not connect the appliance to the mains electricity supply by an extension lead. These do not guarantee the required safety of the appliance.

Please make sure that the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable isolator which complies with national and local safety regulations, and the On/Off switch should be easily accessible after the appliance has been built in.

If the switch is not accessible after installation (depending on country) an additional means of disconnection must be provided for all poles.

For extra safety it is advisable to protect the appliance with a residual current device (RCD). Please contact a qualified electrician for advice.

When switched off there must be an all-pole contact gap of at least 3 mm in the isolator switch (including switch, fuses and relays).

Important U.K.

The appliance is supplied for connection to a 230-240 V, 50 Hz supply with a 3-core cable.

The wires in the mains lead are coloured in accordance with the following code:

Green/yellow	= earth
Blue	= neutral
Brown	= live

WARNING

THIS APPLIANCE MUST BE

EARTHED

65

Image 65

Contents En GB Page Contents After sales service, data plate Models Description of the applianceKM 6202 / KM KM 6204 / KM 6206 / KM Description of the appliance KM 6212 / KM 6213 / KM 6215 / KM Controls Timer display Indicator lightsSensors Cooking zone displaysCooking KM 6202 / KM Zone Rating Watts for Cooking zonesCooking KM 6204 / KM 6206 / KM Zone Rating in watts for 230 Cooking Zone Rating in watts for 230Description of the appliance Page Correct application Safety with children Technical safety Page Correct use Page Cleaning and care Disposing of your old appliance Caring for the environmentDisposal of the packing material Before using for the first time Before using for the first timeCleaning for the first time Double circle zone How the cooking zones workSingle circle zone Exception OperationOperating principals To switch the hob on Switching onSetting the power level Standard power level range Extended power level range see Power level rangeAltering the power level Power levels SettingsTo deactivate Auto heat-up Auto heat-upTo activate Auto heat-up Heat-up time Cooking setting Minutes and seconds approxOuter ring of a vario/extended zone Switching on manuallyExtendedPlus zone depending on model Switching off the extended cooking areaSwitching off a cooking zone Switching off and residual heat indicatorsSwitching off the hob Residual heat indicatorMost suitable Suitable pansLess suitable Not suitableTips on saving energy Timer To set the minute minder time Minutes Minute minderHours To delete the minute minder time To change the minute minder timeTo switch a cooking zone off automatically To use both timer functions at the same time Safety lock / System lock Safety featuresTo deactivate the system lock To activate the system lockDeactivating Stop and GoActivating Safety switch-off with an over-long cooking time Safety switch-offSafety switch-off if the sensors are covered Min Overheating/pan protection To avoid damaging the surface of your appliance, do not use Cleaning and careCleaning and care Programming Programming Programming Problem Possible cause Remedy Hob or cooking Problem solving guideSwitched on Zones cannot beSwitched on LC Problem Possible cause Remedy After the hob isAppears in the timer Switched on dEFlashes in the timer Problem Possible cause Remedy Will flashFunction is switched Heat indicators areOver-sensitive or do not Problem Possible cause Remedy Sensors areReact at all FE flashes alternatelyTo test the power level To test the power level Cleaning products Optional accessoriesCeramic and stainless steel hob cleaner 250 ml Cloth microfibre clothXGW Mielehome systemXKM 2100 KM Mielehome Conctivity Signing on the hob Conctivity and MielehomeSigning off the hob Important U.K Electrical connectionWiring diagram Guarantee After sales service, data plateAlteration rights reserved Nr 140 320