Miele KM 5820 installation instructions How the burners operate, One-zone burner, Two-zone burner

Page 13

How the burners operate

One-zone burners use one heating strip; two-zone burners and grill zones have two heating strips. Depending on the model, the heating strips may be separated by a ring.

Each burner has overheating protection (internal temperature limiter) feature to prevent the ceramic glass from overheating (see "Overheat protection").

When a power level is set, the heat element turns on and the heating strip is visible through the ceramic glass.

The power setting determines how hot the burner will get, and is electronically regulated. This means that the burner will switch on and off as needed to maintain the selected power level.

One-zone burner

Overheat protection

Heating strip

Two-zone burner

Technical detail, not a defect

Overheat protection

Outer heating strip

Insulation

Inner heating strip

13

Image 13

Contents Operating and Installation Instructions Ceramic Cooktop Page Contents Children Correct usageTechnical safety Do not Touch the Cooking SafetyImportant Safety Instructions Review Them Periodically Cooktop Description of the applianceBurner Diameter Output in watts at Inches 208 / 240 Control panel Timer display Indicator lightsTouch controls Burner displayClean the cooktop Before using for the first timeHeat the cooktop One-zone burner How the burners operateTwo-zone burner To change the power level To turn a burner on and select a power levelUse Turning onCooking process Power level Standard Extended Power settingsTo activate Auto-heat Cooking with Auto-heatTo deactivate Auto heat-up Heat-up timeThree-zone burner Variable burnerTo turn the booster off Residual heat indicator Turning off and residual heat indicatorsTo turn a burner off To turn the cooktop offEnergy saving tips Selecting cookwareTimer Minutes Setting the timerHours To clear the set time To change the set timeTurning a burner off automatically Using both timer functions at the same time Child safety lock / System lock Safety featuresTo activate the locks To deactivate the locksTo activate Stop and Go Stop and GoTo deactivate Stop and Go Safety shut-off for cooking times that are too long Safety shut-offSafety shut-off if the touch controls are covered Overheat protection Ceramic surfaces Cleaning and CareProgramming Programming Program Status SettingProgramming Cooktop turns off while it is in use Frequently asked questionsHeating for one of the burners turns on and off Auto-heat is turned on, but the food does not start cooking One or several residual heat indicators are flashingFE flashes alternately with numbers in the timer display Technical Service Installation Instructions Important Installation Safety Instructions Safety distance from divider Safety distances above the applianceNot allowed Recommended Not recommended Safety distances to the sides of the applianceSafety distance from the wall covering InstallationCooktops flush with the countertop Frame/Facet cooktops Tiled surfaces Frame/Facet Cooktops SealingInstallation dimensions Wood or solid surface countertop Facet cooktopsGranite countertop Insert the cooktop Electrical connection Disposal of packing materials Help protect our environmentDisposal of an old appliance Page Page Page Alteration rights reserved Nr 844 700

Related manuals

Manual 52 pages 54.91 Kb