Miele KM 5820 installation instructions Technical safety

Page 5

IMPORTANT SAFETY INSTRUCTIONS

Technical safety

￿Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.

￿Be sure your appliance is properly installed and grounded by a qualified technician.

￿Before installing the cooktop, check for externally visible damage. Do not operate a damaged appliance.

￿To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.

￿Before installation, make sure that the voltage and frequency listed on the rating label correspond with the household electrical supply. To prevent injury and appliance damage, these data must match. Consult a qualified electrician if in doubt.

￿Do not use an extension cord to connect this appliance to the electrical supply. Extension cords do not ensure the required safety of the appliance.

￿Install the appliance so that the power cord does not come into contact with any portion of the cooktop which may become hot during use.

￿Do not use the appliance until it has been properly installed in the countertop.

￿Before servicing, disconnect the appliance from the main power supply.

￿Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Service Department.

￿Under no circumstances open the outer casing of the appliance.

￿While the appliance is under warranty repairs should only be performed by an authorized service technician. Otherwise the warranty is void.

￿In the event of any damage to the appliance, it must be turned off immediately and disconnected from the main power supply. Contact Miele’s Technical Service Department.

Do not use the appliance until it has been repaired. Ensure power is not supplied to the appliance until repair work is completed.

￿Defective components should be replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.

￿Do not cook on a broken cooktop. Any breakages or cracks in the ceramic surface of the appliance are defects and must be treated as such. If the cooktop should break, cleaning solutions and spills may penetrate the broken cooktop and create a risk of electric shock. Do not use the appliance until it has been repaired.

5

Image 5
Contents Operating and Installation Instructions Ceramic Cooktop Page Contents Children Correct usageTechnical safety Do not Touch the Cooking SafetyImportant Safety Instructions Review Them Periodically Burner Diameter Output in watts at Inches 208 / 240 Description of the applianceCooktop Control panel Timer display Indicator lightsTouch controls Burner displayHeat the cooktop Before using for the first timeClean the cooktop Two-zone burner How the burners operateOne-zone burner To change the power level To turn a burner on and select a power levelUse Turning onCooking process Power level Standard Extended Power settingsTo activate Auto-heat Cooking with Auto-heatTo deactivate Auto heat-up Heat-up timeTo turn the booster off Variable burnerThree-zone burner Residual heat indicator Turning off and residual heat indicatorsTo turn a burner off To turn the cooktop offEnergy saving tips Selecting cookwareTimer Hours Setting the timerMinutes To clear the set time To change the set timeTurning a burner off automatically Using both timer functions at the same time Child safety lock / System lock Safety featuresTo activate the locks To deactivate the locksTo deactivate Stop and Go Stop and GoTo activate Stop and Go Safety shut-off if the touch controls are covered Safety shut-offSafety shut-off for cooking times that are too long Overheat protection Ceramic surfaces Cleaning and CareProgramming Programming Program Status SettingProgramming Heating for one of the burners turns on and off Frequently asked questionsCooktop turns off while it is in use Auto-heat is turned on, but the food does not start cooking One or several residual heat indicators are flashingFE flashes alternately with numbers in the timer display Technical Service Installation Instructions Important Installation Safety Instructions Safety distance from divider Safety distances above the applianceNot allowed Recommended Not recommended Safety distances to the sides of the applianceCooktops flush with the countertop Frame/Facet cooktops InstallationSafety distance from the wall covering Tiled surfaces Frame/Facet Cooktops SealingInstallation dimensions Wood or solid surface countertop Facet cooktopsGranite countertop Insert the cooktop Electrical connection Disposal of an old appliance Help protect our environmentDisposal of packing materials Page Page Page Alteration rights reserved Nr 844 700
Related manuals
Manual 52 pages 54.91 Kb