Miele KM 5820 installation instructions Safety shut-off for cooking times that are too long

Page 27

Safety features

Safety shut-off

Safety shut-off for cooking times that are too long

If a burner is heated for an unusually long period of time (see chart) at the same power level, the cooktop will turn itself off automatically and the residual heat indicator will appear.

To use the burner again, turn it back on in the usual way.

Power level*

Maximum operating

 

 

time in hours

1

/ 1.

10

 

 

 

2

/ 2.

5

 

 

 

3

/ 3.

5

 

 

 

4

/ 4.

4

 

 

 

5

/ 5.

3

 

 

 

6

/ 6.

2

 

 

 

7

/ 7.

2

 

 

 

8

/ 8.

2

 

 

 

 

9

1

 

 

 

*Power levels with a " ." are only available with the extended power-level settings (see "Programming").

Safety shut-off if the touch controls are covered

Your cooktop will turn off automatically if one or several of the touch controls remain covered for longer than 10 seconds, for example by fingers, food that boils over or by an object placed on them.

An F will flash in the timer display.

￿Clean the control panel or remove the object covering the control.

F will go out. The cooktop can now be used again.

27

Image 27
Contents Operating and Installation Instructions Ceramic Cooktop Page Contents Children Correct usageTechnical safety Do not Touch the Cooking SafetyImportant Safety Instructions Review Them Periodically Description of the appliance CooktopBurner Diameter Output in watts at Inches 208 / 240 Control panel Burner display Indicator lightsTimer display Touch controlsBefore using for the first time Clean the cooktopHeat the cooktop How the burners operate One-zone burnerTwo-zone burner Turning on To turn a burner on and select a power levelTo change the power level UseCooking process Power level Standard Extended Power settingsHeat-up time Cooking with Auto-heatTo activate Auto-heat To deactivate Auto heat-upVariable burner Three-zone burnerTo turn the booster off To turn the cooktop off Turning off and residual heat indicatorsResidual heat indicator To turn a burner offEnergy saving tips Selecting cookwareTimer Setting the timer MinutesHours To clear the set time To change the set timeTurning a burner off automatically Using both timer functions at the same time To deactivate the locks Safety featuresChild safety lock / System lock To activate the locksStop and Go To activate Stop and GoTo deactivate Stop and Go Safety shut-off Safety shut-off for cooking times that are too longSafety shut-off if the touch controls are covered Overheat protection Ceramic surfaces Cleaning and CareProgramming Programming Program Status SettingProgramming Frequently asked questions Cooktop turns off while it is in useHeating for one of the burners turns on and off Auto-heat is turned on, but the food does not start cooking One or several residual heat indicators are flashingFE flashes alternately with numbers in the timer display Technical Service Installation Instructions Important Installation Safety Instructions Safety distance from divider Safety distances above the applianceNot allowed Recommended Not recommended Safety distances to the sides of the applianceInstallation Safety distance from the wall coveringCooktops flush with the countertop Frame/Facet cooktops Tiled surfaces Frame/Facet Cooktops SealingInstallation dimensions Wood or solid surface countertop Facet cooktopsGranite countertop Insert the cooktop Electrical connection Help protect our environment Disposal of packing materialsDisposal of an old appliance Page Page Page Alteration rights reserved Nr 844 700
Related manuals
Manual 52 pages 54.91 Kb