Installation
Insert the cooktop
Feed the power cord down through the
Place the cooktop lightly on the spring clips.
With a hand on each side of the appliance press down evenly on the edges until it clicks into position. When doing so make sure that the appliance seal sits tightly on the countertop to ensure it is sealed correctly. This is important to ensure an effective seal. Do not permanently seal into the countertop.
If during installation the seal around the frame does not sit flush with the countertop in the corners, the corner radius, maximum 3/16" (4 mm), can be carefully filed down to fit.
Connect the appliance to the main power supply (see "Electrical connection").
Turn the appliance on and check the function.
The appliance may be lifted out using a special tool.
The appliance can also be pushed up and out from underneath.
46