Setting the buzzer alarm
Note: Clock uses 24 hour system.
1.Repeatedly press and release the Standby button until the display shows ‘Buzzer’.
2.Whilst the display 
symbol and alarm time are flashing set the required hour using the Hour + and - buttons.
3.Set the required minute using the Minute + and - buttons. Press and release the Standby button to complete alarm setting.
4.At the preselected time the alarm will sound. The alarm may be turned off for 24 hours by pressing the Power button.
5.Pressing any other button (except Standby or
) whilst the alarm is sounding will activate the snooze function. The alarm will be silenced for 5 minutes.
6.To permanently cancel the alarm repeatedly press and release the Standby button until the
symbol is removed from the display.
If you need any further advice, please call our Technical Helpline on :- | 9 |
020 8758 0338 |
|