Roberts Radio R9940 Setting the clock time manually

Page 10

Setting the clock time manually

When batteries are installed for the first time the display will show - - : - -.

Time can be manually set with the radio switched on or off. The clock uses the 24 hour system e.g. 2:00pm is shown as 14:00.

1.Slide the Clock auto adjust switch to the ‘Off’ position

2.Press and release the Time set button , the display

will show ‘TIME SET’

.

3.The clock uses the 24 hour system e.g. 2:00pm is shown as 14:00. Set the correct hour using the Hour + and - buttons.

4.Set the correct minute using the Minute + and - buttons.

5.Press and release the Time set button to complete time setting.

6.The display will show the correct time.

8

Image 10

Contents R9940 Contents Features Controls Page Display Installing batteries Battery replacement Setting the clock automaticallySlide the Clock auto adjust switch to the ‘On’ position Setting the clock time manually Setting the buzzer alarm Symbol is removed from the displaySetting the radio alarm Search tuning Switch on your radio by pressing the Power buttonManual tuning MW AM tuning step size Presetting stations Recalling a preset station Deleting a preset stationATS Automatic Tuning System Select the required waveband by pressing the Bands buttonOperating your radio using RDS Radio data system Display Modes FM only Setting the sleep timer FM stereo/mono button FM onlyDisplay backlight Lock buttonUsing an AC adaptor not included Headphones Troubleshooting/Reset button Specifications Power requirementsGuarantee Roberts Radio Technical Services