Roberts Radio R9940 manual Troubleshooting/Reset button

Page 25

Troubleshooting/Reset button

If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.

1.Switch off the radio and remove the batteries.

2.With the aid of a suitable implement (the end of a paper clip) press the reset button located in the battery compartment for at least 5 seconds, this will reset the microprocessor, clock time and clear all stations stored in preset memory.

If a problem persists our technical staff would be pleased to offer any assistance on operating the radio. Our technical helpline number is: 020 8758 0338.

If you need any further advice, please call our Technical Helpline on :-	23
020 8758 0338 (Mon-Fri)

Image 25

Contents R9940 Contents Features Controls Page Display Installing batteries Setting the clock automatically Battery replacementSlide the Clock auto adjust switch to the ‘On’ position Setting the clock time manually Symbol is removed from the display Setting the buzzer alarmSetting the radio alarm Switch on your radio by pressing the Power button Search tuningManual tuning MW AM tuning step size Presetting stations Deleting a preset station Recalling a preset stationSelect the required waveband by pressing the Bands button ATS Automatic Tuning SystemOperating your radio using RDS Radio data system Display Modes FM only FM stereo/mono button FM only Setting the sleep timerLock button Display backlightUsing an AC adaptor not included Headphones Troubleshooting/Reset button Power requirements SpecificationsGuarantee Roberts Radio Technical Services