Roberts Radio R9940 manual Battery replacement, Setting the clock automatically

Battery replacement

The battery indicator will appear in the display immediately your radio is switched off. Batteries should be replaced when the indicator shows less than

3.After removing batteries you have approximately 3 minutes to replace the batteries after which clock and memory information will be lost.

When the low battery indicator appears in display replace batteries immediately.

Setting the clock automatically

The clock time can be set automatically when receiving an RDS station that transmits clock time (CT). The CT information is transmitted once every minute. If the station has sufficient signal strength the clock will set within one or two minutes.

1.Switch on the radio with the Power button.

2.Select the FM waveband by repeat pressing of the Waveband button.

3.Fully extend the Telescopic aerial.

6