Runco PL-61CX manual Setting the picture size for RGB input signals, Information,  S1/S2 settings

Information

S1/S2 settings

AUTO .....Adjusts the screen size automatically

according to the S1/S2 video signal. OFF ....... Turns the S1/S2 function off.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Setting the picture size for RGB input signals

Use this procedure to switch the setting to “ON” or “OFF”. * Cannot be set in some models.

Example: Setting the “PICTURE SIZE” mode to “OFF”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.

The “OPTION2” screen appears.

2.Use the ▲ and ▼ buttons to select “PICTURE SIZE”.

3.To set PICTURE SIZE mode to “OFF”...

Use the  and  buttons to select “OFF”.

The mode switches as follows each time the  or  button is pressed:

ON ↔ OFF

		OPTION2		2 / 3
	PREVIOUS PAGE
POWER MGT.			:	OFF
CINEMA MODE			:	ON
LONG LIFE
GRAY LEVEL			:	3
S1/S2			:	OFF
			:	OFF
	PICTURE SIZE

DVI SET UP
NEXT PAGE
SEL.	ADJ.	EXIT RETURN

Information

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Setting the signal and black level for DVI signal

Choose the signal for the DVI connector (PC or STB/ DVD) and set the black level.

Example: Setting the “PLUG/PLAY” mode to “STB/ DVD”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.

The “OPTION2” screen appears.

2.Use the ▲ and ▼ buttons to select “DVI SET UP”, then press the MENU/ENTER button.

The “DVI SET UP” screen appears.

3.To set PLUG/PLAY mode to “STB/DVD”...

Use the  and  buttons to select “STB/DVD”.

The mode switches as follows each time the  or  button is pressed:

PLUG/PLAY:		PC ↔	STB/DVD
BLACK LEVEL: LOW ↔			HIGH
		DVI SET UP
	PLUG/PLAY		:	STB/DVD
BLACK LEVEL			:	HIGH

SEL. ADJ. EXIT RETURN

Information

PLUG/PLAY settings

PC .............. When connected to the PC signal.

BLACK LEVEL is set to “LOW” automatically.

STB/DVD ... When connected to the SET TOP BOX, DVD etc.

BLACK LEVEL is set to “HIGH” automatically.

BLACK LEVEL settings

LOW ........... When connected to the PC signal.

HIGH .......... When connected to the SET TOP BOX,

DVD etc. Change “HIGH” into “OFF” if the black level appears gray.

45