Runco PL-61CX manual Image Adjust Settings Menu, Setting the allocation of the audio connectors

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired input.

Example: Setting “AUDIO INPUT1” to “VIDEO 2”

1.On the MAIN MENU, select “AUDIO”, then press the MENU/ENTER button.

The “AUDIO” screen appears.

2.Use the ▲ and ▼ buttons to select “AUDIO INPUT1”.

3.To set the AUDIO INPUT1 to “VIDEO2”...

Use the  and  buttons to select “VIDEO2”.

The mode switches as follows each time the  or  button is pressed:

The available sources depend on the setting of “BNC INPUT”.

RGB:	→	VIDEO1 ↔	VIDEO2 ↔	VIDEO3 ↔	HD/DVD1←
	→	RGB3 ↔ RGB2 ↔ RGB1 ←
COMP.: →					HD/DVD1←
		VIDEO1 ↔	VIDEO2 ↔	VIDEO3↔

→RGB3 ↔ RGB1 ↔ HD/DVD2 ←

			AUDIO
BASS
TREBLE
BALANCE
	AUDIO INPUT1		:	VIDEO2
AUDIO INPUT2			:	HD/DVD1
AUDIO INPUT3			:	RGB1
		SEL.	ADJ.		RETURN
				EXIT

Information

AUDIO INPUT

A single audio input cannot be selected as the audio channel for more than one input terminal.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Image Adjust Settings Menu

Adjusting the Position, Size, Fine Picture, Picture Adj

The position of the image can be adjusted and flickering of the image can be corrected.

Example: Adjusting the vertical position in the normal mode

1.On the MAIN MENU, select “IMAGE ADJUST”, then press the MENU/ENTER button.

The “IMAGE ADJUST” menu appears.

Default settings (when RGB/PC is selected)

IMAGE ADJUST

ASPECT MODE		:	NORMAL
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE		:	OFF
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.			RETURN
			EXIT

*The settings on the IMAGE ADJUST menu are not preset at the factory.

To select a mode ...

Use the  and  buttons to select a mode.

The mode switches as follows each time the  or  button is pressed:

NORMAL ↔ FULL

*The mode can also be switched by pressing the “WIDE” button on the remote control.

2.To adjust the vertical position ...

Use the ▲ and ▼ buttons to select “V-POSITION”.

IMAGE ADJUST

ASPECT MODE		:	NORMAL
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE		:	OFF
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.			RETURN
			EXIT

3. Adjust using the  and  buttons.

V-POSITION

*If neither the  or  button is pressed within 5 seconds, the current setting is set and the previous screen reappears.

To continue making other computer image

adjustments ...

Repeat from step 2.

36