Runco PL-61CX manual Rear Panel

Rear Panel

1	5
COMLINK OUT
12V FUSE
			RGB OUTPUT					VIDEO INPUTS
RS-232 IN	V	H	B	G	R	HDTV	Y	Pr	Pb S-VIDEO COMPOSITE

MASK SCREEN

12V TRIGGER

CAUTION	!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE CENTER.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

RUNCO INTERNATIONAL

UNION CITY, CA

MADE IN USA

AC 120V 60Hz, 15W

MADE IN USA

2 3 4 6 7 8 9 10 11 12 13

1.12v FUSE

This fuse protects the 12v outputs from the MASK and SCREEN jacks. (Screen Fuse: 5mm x 25mm, AGC, 0.5A, 250V, Fast Blow)

2.MASK

This is a 12V output that can be used to trigger curtains, lifts, etc. (1/4A maximum load).

3.SCREEN

This is a 12V output that can be used to trigger curatins, lifts, etc. (1/4A maximum load).

4.RS-232 IN

This is for systems using serial (RS-232) to control the PFP Controller.

5.COMLINK OUT

The output of this jack must be connected to the ComLink input of the PL-61cx Plasma monitor. If this is not connected, neither the Controller or the Plasma can operate.

6.RGB OUTPUT

This is the RGB output of the PFP Controller. Connect the RGB output of the Controller to the PL-61cx’s RGB BNC port.

7.HDTV/PROGRESSIVE DVD

This is the input for HDTV or progressive DVD sources.

If the signal is RGB, select ‘RGB HD’; if it is Component, select ‘Component HD’.

8.COMPONENT INPUT

This is the input for Component Video from sources such as DVD players.

Note: The component output from a DTV decoder or a progressive-scan DVD cannot be used with this port; it must be used with the HDTV port.

9.S-VIDEO INPUT

This is the input for S-Videofrom sources such as Satellite receivers, S-VHS VCR’s and DVD players.

10.COMPOSITE VIDEO INPUT

This is the input for Composite Video from sources such as laser disc players, VCRs and other misc. sources.

11.POWER INPUT

Plug in Main Power here.

12.115 VAC FUSE

This is the main AC Input fuse (.5A/250V).

13.MAIN POWER SWITCH

Disconnects or applies main power to the Controller.

14