External Control, Application, Connections | Runco PL-61CX manual

External Control

Application

These specifications cover the communications control of the plasma monitor by external equipment.

Connections

Connections are made as described below.

External equipment e.g., Personal computer

Display

Connector on the plasma monitor side: EXTERNAL CONTROL connector.

Use a crossed (reverse) cable.

Type of connector: D-Sub 9-pin male

Pin No.	Pin Name
1	No Connection
2	RXD (Receive data)
3	TXD (Transmit data)
4	DTR (DTE side ready)
5	GND
6	DSR (DCE side ready)
7	RTS (Ready to send)
8	CTS (Clear to send)
9	No connection

1	2	3	4	5
6	7		8	9

Communication Parameters

(1)	Communication system	Asynchronous
(2)	Interface	RS-232C
(3)	Baud rate	9600 bps
(4)	Data length	8 bits
(5)	Parity	Odd
(6)	Stop bit	1 bit
(7)	Communication code	Hex

External Control Codes (Reference)

FUNCTION		CODE DATA
Power ON		9FH	80H	60H	4EH	00H	CDH
OFF		9FH	80H	60H	4FH	00H	CEH

Input Switch	Video1 (BNC)	DFH	80H	60H	47H	01H	01H	08H
	Video2 (RCA)	DFH	80H	60H	47H	01H	02H	09H
	Video3 (S-Video)	DFH	80H	60H	47H	01H	03H	0AH
	DVD1/HD1 (RCA)	DFH	80H	60H	47H	01H	05H	0CH
	DVD2/HD2 (BNC)	DFH	80H	60H	47H	01H	06H	0DH
	RGB1 (mini D-sub 15-pin)	DFH	80H	60H	47H	01H	07H	0EH
	RGB2 (5BNC)	DFH	80H	60H	47H	01H	08H	0FH
	RGB3 (DVI)	DFH	80H	60H	47H	01H	0CH	13H

Audio Mute	ON	9FH	80H	60H	3EH	00H	BDH
	OFF	9FH	80H	60H	3FH	00H	BEH

Picture Mode	NORMAL	DFH	80H	60H	OAH	01H	01H	CBH
	THEAT. 1	DFH	80H	60H	OAH	01H	02H	CCH
	THEAT. 2	DFH	80H	60H	OAH	01H	03H	CDH
	DEFAULT	DFH	80H	60H	OAH	01H	04H	CEH

Screen Mode	STADIUM	DFH	80H	60H	51H	01H	02H	13H
	ZOOM	DFH	80H	60H	51H	01H	03H	14H
	NORMAL	DFH	80H	60H	51H	01H	04H	15H
	FULL	DFH	80H	60H	51H	01H	05H	16H
	14 : 9	DFH	80H	60H	51H	01H	09H	1AH
	2.35 : 1	DFH	80H	60H	51H	01H	0AH	1BH

Auto Picture	ON	DFH	80H	60H	7FH	03H	03H	09H	00H	4DH
	OFF	DFH	80H	60H	7FH	03H	03H	09H	01H	4EH

Cinema Mode ON		DFH	80H	60H	C1H	01H	01H	82H
	OFF	DFH	80H	60H	C1H	01H	02H	83H

Note: Contact your local dealer for a full list of the External Control Codes if needed.

55

Image 65

Runco PL-61CX manual Application, Connections, Communication Parameters, External Control Codes Reference

Contents

PL-61cx Table of Contents External Control Contents of the package Features you’ll enjoy includeIntroduction Options Risk of Electric Shock Do not Open PrecautionsImportant Information Recommendations to avoid or minimize phosphor burn-in Plasma monitor cleaning procedureTo avoid damage and prolong operating life Three Year Limited Warranty RIGHTS, Limits and Exclusions TWO Year Limited Warranty RIGHTS, Limits and Exclusions How to Attach Options to the Plasma Monitor Receives the signals from the remote control Turns the plasma monitor’s power on and offSets the On-Screen Menu mode and displays the main menu Part Names and Function Connect DVD’s, High Definition or Laser Discs, etc here Connect the included power cord hereRear View / Terminal Board Installation Remote Control Use of Installation Remote Control Battery Installation and Replacement 1/8 Stereo Mini cable must be purchased separeately Using the wired remote control modeOperating Range Video Plasma Monitor Installation Connecting Your VCR or Laser Disc Player Connecting Your Document CameraConnecting Your DVD Player Connections with Equipment that have a Digital Interface Pin No Signal Analog Pin Assignments and Signal Levels for 15 pin RGB Analog Cable Management Creating a video wall PFP Controller Installation & Overall Description Front Panel PFP Controller Description RGB Output Video Inputs Rear Panel PFP Controller Remote Description Connection Examples Quick Set-up Guide Main Menu Menu Tree Picture Quality Adjustments Page Page Side Bar Level Installation Menu Invert IR Code Select Output ShiftInput Shift Blanking System ResetBlanking Basic Operations To cancel the off timer To set the off timerAfter the power is turned off with the off timer To check the remaining time Wide Operations When viewing videos or digital video discs When Picture Size is set to OFF Wide Screen Operation with Computer Signals Supported resolution Picture Size setting Menu Operations Advanced menu mode Menu Tree Reset OPTION2 PWR. MGT Adjusting the picture Picture Settings Menu Reducing noise in the picture Setting the color temperatureAdjusting the color to the desired level Adjusting the white balance Making the Low Tone adjustments Gamma settings LOW Tone settings Adjusting the colors Audio Settings Menu Color Tune settings Audio settings menu Setting the allocation of the audio connectors Image Adjust Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj Example Setting Audio INPUT1 to Video Setting the on-screen menu Option1 Settings Menu Checking the signal being transmitted to RGB1 terminal Setting the BNC connectorsSetting a computer image to the correct RGB select screen OSM Orbiter settings Setting the Input Skip Setting high definition images to the suitable screen size Input Skip settings RGB Select modes Setting the power management for computer images Option2 Settings MenuResetting to the default values Setting the picture to suit the movie POWER/STANDBY indicator PLE settings Reducing burn-in of the screen Inverse Settings Orbiter settings Orbiter Function settings Screen Wiper Setting the time To select on for the Working Time Soft Focus settings Setting the screen size for S1/S2 video inputSetting the gray level for the sides of the screen Gray Level settings Setting the signal and black level for DVI signal Setting the picture size for RGB input signals S1/S2 settings PLUG/PLAY settings Using the timer Option3 Settings Menu Present Time settings Present Time To reset the program Setting the power on mode To reset the data Special characters in the Program Timer screen PWR. on Mode settings Enabling/disabling remote control wireless transmission Control Lock settings IR Remote settings ID number setting Loop Out setting Divider settings Video Wall setting Video Wall Position settings Screens Image Adjust settings Auto ID settings DISP. Mode settings P. on Delay settings On Delay Power on delay PLE Link settings PLE Link Setting the menu mode Advanced OSM Settings MenuRepeat Timer Repeat Timer settings Color System Settings Menu Language Settings MenuSetting the language for the menus Setting the video signal format Application External ControlConnections Communication Parameters Computer input signals supported by this system Table of Signals SupportedSupported resolution General Information PFP Controller RS-232 Communications Parameter min/max Value stored? PFP Controller RS-232 Commands Store YES Symptom Checks Remedy TroubleshootingPage Power LED on the front After initial installation.Yellow after the power button Plasma does not turn on Image appears too On, and the power LED onBright, and there is a loss Definition in the bright 1366 x Weight 140 lbs .5 kgDiagonal 169 Pfptm Controller Specifications & Dimensions RUMA-006830-SPL