Setting the screen size for S1/S2 video input

Information

Setting the time

WORKING TIME	Set the time duration for “SCREEN
	WIPER”.
	When the WORKING TIME is set
	to “ON” the mode will stay on.
WAITING TIME	Set the standby time until the
	“SCREEN WIPER” mode starts.
SPEED	Set the moving speed for the
	“SCREEN WIPER”. The speed
	decreases as the number increases.

*The “WAITING TIME” can not be set when the “WORKING TIME” is ON.

*THE “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.

SOFT FOCUS

Reduces edges and softens the image.

Example: Setting “SOFT FOCUS” to “2”

Perform Steps 1-2 of LONG LIFE, then...

3.Use the ▲ and ▼ buttons to select “SOFT FOCUS”.

4.Use the and buttons to select “2”.

The mode switches as follows each time the or button is pressed:

→OFF ↔ 1 ↔ 2 ↔ 3 ↔ 4

		LONG LIFE
PLE		:	AUTO
ORBITER		:	OFF
INVERSE		:	OFF
SCREEN WIPER		:	OFF
	SOFT FOCUS	:	2
	SEL.	ADJ.		RETURN
			EXIT

Information

SOFT FOCUS settings

OFF ............ Turns the SOFT FOCUS function off.

1, 2, 3, 4 ..... Activates the SOFT FOCUS setting. The

higher numbers create a softer image. “SHARPNESS” can not be adjusted on the “PICTURE” menu.

Setting the gray level for the sides of the screen

Use this procedure to set the gray level for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size.

Example: Adjusting the “GRAY LEVEL”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.

The “OPTION2” screen appears.

2.Use the ▲ and ▼ buttons to select “GRAY LEVEL”.

3.To adjust the “GRAY LEVEL”...

Use the and buttons to adjust the GRAY LEVEL.

			OPTION2		2 / 3
		PREVIOUS PAGE
POWER MGT.				:	OFF
CINEMA MODE				:	ON
LONG LIFE
	GRAY LEVEL			:	5

S1/S2				:	OFF
		NEXT PAGE
		SEL.	ADJ.		EXIT	RETURN

Information

GRAY LEVEL settings

This adjusts the brightness of the black (the gray level) for the sides of the screen.

The standard is 0 (black). The level can be adjusted from 0 to 15. The factory setting is 3 (dark gray).

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.