Runco PL-61CX Video Wall setting, Once the setting is completed, Information,  DIVIDER settings

Video Wall setting

Use this feature to configure a 2⋅ 2 or 3⋅ 3 video wall.

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

1.On the MAIN MENU, select “OPTION3”, then press the MENU/ENTER button.

The “OPTION3” screen appears.

2.Use the ▲ and ▼ buttons to select “VIDEO WALL”, then press the MENU/ENTER button.

The “VIDEO WALL” screen appears.

			VIDEO WALL
	DIVIDER		:	1
POSITION
DISP. MODE			:	SPLIT
AUTO ID			:	OFF
IMAGE ADJUST
P. ON DELAY			:	OFF
PLE LINK			:	OFF
REPEAT TIMER			:	OFF
		SEL.	ADJ.	EXIT	RETURN

3.Set the VIDEO WALL using ▲▼  and  buttons. See page 36 to set DIVIDER.

See page 36 to set POSITION. See page 37 to set DISP. MODE. See page 37 to set AUTO ID.

See page 37 to set IMAGE ADJUST. See page 38 to set P. ON DELAY. See page 38 to set PLE LINK.

See page 39 to set REPEAT TIMER.

4.Once the setting is completed...

Press the EXIT button to return to the OPTION3 menu.

Note: A contingency method of shutting off the electric power should be used in cases of emergency during video wall setup.

Information

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

DIVIDER

Set the 2⋅ 2 or 3⋅ 3 video wall.

Example: Setting “4”

Perform Steps 1-2 of VIDEO WALL, then...

3.Use the ▲ and ▼ buttons to select “DIVIDER”.

4.Use the  and  buttons to select “4”.

The mode switches as follows each time the  or  button is pressed:

→ OFF ↔ 1 ↔ 4 ↔ 9 ←

Information

DIVIDER settings

OFF, 1 ....... 1 Screen (Matrix display function does not

work)

4................ 4 Screens (2⋅ 2 video wall)

9................ 9 Screens (3⋅ 3 video wall)

*When you select “4” or “9”, set the VIDEO WALL POSITION.

VIDEO WALL POSITION

Set the position of each display.

Example: Setting “4”

Perform Steps 1-2 of VIDEO WALL, then...

3.Use the ▲ and ▼ buttons to select “POSITION”, then press the MENU/ENTER button.

The “VIDEO WALL POSITION” screen appears.

4.Use the  and  buttons to select “NO. 4”.

The mode switches as follows each time the  or  button is pressed:

• 4 Screens

→ NO. 1 ↔ NO. 2 ↔ NO. 3 ↔ NO. 4 ←

• 9 Screens

→ NO. 7 ↔ NO. 8 ↔ ....... ↔ NO. 14 ↔ NO. 15 ←

VIDEO WALL POSITION

POSITION NO. 4

ADJ. EXIT RETURN

Information

VIDEO WALL POSITION settings

1Screen ..... There is no need to set POSITION.

4 Screens
	NO. 1		NO. 2
	NO. 4		NO. 3
9 Screens
	NO. 7	NO. 8	NO. 9
	NO. 10	NO. 11	NO. 12
	NO. 13	NO. 14	NO. 15

DIVIDER

VIDEO WALL

: 4

POSITION
DISP. MODE		:	SPLIT
AUTO ID		:	OFF
IMAGE ADJUST
P. ON DELAY		:	OFF
PLE LINK		:	OFF
REPEAT TIMER		:	OFF
SEL.	ADJ.		EXIT	RETURN
				50