Runco PL-61CX manual Perform Steps 1-2 of LONG LIFE, then, Information,  ORBITER settings

LOCK1, 2, 3 .... Sets maximum brightness.

The brightness level decreases in the order of LOCK 1, 2, 3. LOCK 3 provides minimum brightness.

ORBITER

Use this to set the picture shift.

Example: Setting “ORBITER” to “AUTO1”

Perform Steps 1-2 of LONG LIFE, then...

3.Use the ▲ and ▼ buttons to select “ORBITER”.

4.Use the  and  buttons to select “AUTO1”.

The mode switches as follows each time the  or  button is pressed:

→ OFF ↔ AUTO1 ↔ AUTO2 ↔ MANUAL←

			LONG LIFE
PLE			:	AUTO
	ORBITER		:	AUTO1
INVERSE			:	OFF
SCREEN WIPER			:	OFF
SOFT FOCUS			:	OFF
		SEL.	ADJ.		RETURN
				EXIT

Information

ORBITER settings

OFF .............. Orbiter mode does not function.

This is the default setting when RGB is input.

AUTO1 ......... The picture moves around the screen

intermittently, making the picture smaller. This is the default setting when a Video or a DVD/HD/DTV singnal is input. Set to “OFF” when these signals are not used.

AUTO2 ......... The picture moves around the screen

intermittently, making the picture bigger.

MANUAL ...... User can adjust the orbiter function

(Horizontal Dot, Vertical Line and Time) manually.

See the following explanation.

*When a Video or a DVD/HD/DTV singnal is input, the AUTO1 and 2 functions will affect only the moving picture and will not make the screen smaller or bigger.

Adjust the ORBITER function manually

Set the amount of shift and the time between movement.

Example: Setting so that the picture moves 2 dots horizontally and 3 lines vertically every 3 minutes.

Perform Steps 1-3 of ORBITER, then...

4.Use the  and  buttons to select “MANUAL”, then press the MENU/ENTER button.

THE “ORBITER” screen appears.

5.Adjust the items using the ▲▼  and  buttons.

The mode switches as follows each time the  or  button is pressed:

• H-DOT

→ 1 DOT ↔ 2 DOT ↔ ..... ↔ 19 DOT ↔ 20 DOT←

• V-LINE

→ 1 LINE ↔ 2 LINE ↔ ..... ↔ 19 LINE ↔ 20 LINE←

• TIME

→	1 M ↔ 2 M ↔ 3 M ↔		4 M ↔	5 M←
			ORBITER
			:	2 DOT
		H-DOT
	V-LINE		:	4 LINE
	TIME		:	3 M

SEL. ADJ. EXIT RETURN

Information

ORBITER Function settings

H-DOT	Moves from 1 to 20 dots in the
	horizontal direction.
V-LINE	Moves from 1 to 20 lines in the vertical
	direction.
TIME	Interval of 1~5 minutes (1 horizontal
	dot or 1 vertical line per interval).

INVERSE

Use this to set the inverse mode or to display a white screen.

Example: Setting “INVERSE” to “WHITE”

Perform Steps 1-2 of LONG LIFE, then...

3.Use the ▲ and ▼ buttons to select “INVERSE”.

4.Use the  and  buttons to select “WHITE”.

The mode switches as follows each time the  or  button is pressed:

→ OFF ↔ ON ↔ WHITE←

			LONG LIFE
PLE			:	AUTO
ORBITER			:	OFF
	INVERSE		:	WHITE
SCREEN WIPER			:	OFF
SOFT FOCUS			:	OFF
		SEL.	ADJ.		RETURN
				EXIT

Information

INVERSE Settings

ON ......... The picture is displayed alternately between

positive image and negative image.

You can set the time by pressing the MENU/ ENTER button while “ON” is set.

OFF ....... Inverse mode does not function.

WHITE ... The entire screen turns white.

You can set the time by pressing the MENU/ ENTER button while “ON” is set.

42