Runco PL-61CX Using the wired remote control mode, Operating Range, Handling the remote control

Using the wired remote control mode

Connect the remote cable* to the remote control’s remote jack and the “REMOTE IN” terminal on the monitor. When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control is used, the remote control can be operated even if no batteries are loaded.

External Control

IN

REMOTE

OUT

Operating Range

*Use the remote control within a distance of about 23 ft. (7m) from the front of the monitor’s remote control sensor and at horizontal an vertical angles of up to approximately 30o.

*The remote control operation may not function if the monitor’s remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an obstacle between the sensor and the remote control.

Approx.

23 ft (7m)

*The 1/8 Stereo Mini cable must be purchased separeately.

Handling the remote control

•Do not drop or mishandle the remote control.

•Do not get the remote control wet. If the remote control gets wet, wipe it dry immediately.

•Avoid heat and humidity.

•When not using the remote control for a long period, remove the batteries.

•Do not use new and old batteries together, or use different types together.

•Do not take apart the batteries, heat them, or throw them into a fire.

•When using the remote control in the wireless condition, be sure to unplug the remote cable from the REMOTE IN terminal on the monitor.

7