Runco PL-61CX manual Option2 Settings Menu, Resetting to the default values, Information

Resetting to the default values

Use these operations to restore all the settings (PICTURE, AUDIO, IMAGE ADJUST, OPTION1~3, etc) to the factory default values.

1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.

The “OPTION1” screen appears.

2.Use the ▲ and ▼ buttons to select “ALL RESET”.

		OPTION1		1 / 3
OSM
BNC INPUT			:	RGB
D-SUB INPUT			:	RGB
RGB SELECT			:	AUTO
HD SELECT			:	1080B
INPUT SKIP			:	OFF
ALL RESET			:	OFF
	NEXT PAGE
	SEL.	ADJ.		EXIT	RETURN

3.Use the  and  buttons to select “ON”, then press the MENU/ENTER button.

		OPTION1			1 / 3
OSM
BNC INPUT				:	RGB
D-SUB INPUT				:	RGB
RGB SELECT				:	AUTO
HD SELECT				:	1080B
INPUT SKIP				:	OFF
ALL RESET				:	ON
	NEXT PAGE
	SEL.	MENU/ENTER	OK		EXIT	RETURN

ALL RESET

SETTING NOW

When the “SETTING NOW” screen disappears, then all the settings are restored to the default values.

Option2 Settings Menu

Setting the power management for computer images

This energy-saving (power management) function automatically reduces the monitor’s power consumption if no operation is performed for a certain amount of time.

Example: Turning the power management function on

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.

The “OPTION2” screen appears.

2.Use the ▲ and ▼ buttons to select “PWR. MGT.”.

3.To turn the power management function on ...

Use the  and  buttons to select “ON”.

The mode switches as follows each time the  or  button is pressed:

ON ↔ OFF

		OPTION2		2 / 3
	PREVIOUS PAGE
	POWER MGT.		:	ON
CINEMA MODE			:	ON
LONG LIFE
GRAY LEVEL			:	3
S1/S2			:	OFF
	NEXT PAGE
	SEL.	ADJ.		EXIT	RETURN

Information

Power management function

*The power management function automatically reduces the monitor’s power consumption if the computer’s keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer.

*If the computer’s power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state.

*For instructions on using the computer’s power management function, refer to the computer’s operating instructions.

Power management settings

ON ........ In this mode the power management function

is turned on.

OFF ...... In this mode the power management function

is turned off.

Power management function and POWER/ STANDBY indicator

The POWER/STANDBY indicator indicates the status of the power management function.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

40