Setting the time for INVERSE/WHITE
Set a time duration.
Example: Setting to that the INVERSE mode starts in 2 hours and proceeds for one hour and a half.
Perform Steps 1-3 of INVERSE, then...
4.Use the and buttons to select “ON”, then press the MENU/ENTER button.
THE “INVERSE/WHITE” screen appears.
5.Adjust the time using the ▲▼ and buttons.
The mode switches as follows each time the or button is pressed:
• WORKING TIME
→ ON ↔ 00H03M ↔ 00H06M ↔ ..... ↔ 12H42M ↔ 12H45M←
•WAITING TIME
→ 00H03M ↔ 00H06M ↔ 00H09M ↔ ... ↔ 12H42M ↔ 12H45M←
INVERSE/WHITE |
| |
WORKING TIME | : | 01H30M |
WAITING TIME | : | 02H00M |
SEL. | ADJ. | EXIT | RETURN |
Information
Setting the time
WORKING TIME ..... Set the time duration for
“INVERSE/WHITE”.
When the WORKING TIME is set to “ON” the mode will stay on.
WAITING TIME ...... Set the standby time until the
“INVERSE/WHITE” mode starts.
*The “WAITING TIME” can not be set when the “WORKING TIME” is ON.
*THE “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.
*Ending a WORKING TIME function, the monitor will
be STAND BY. [Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M
|
| ←−−−− | 2 H | −−−−→←−− |
| 1.5 H −−→←−−−− |
|
|
|
|
| ||||||
Start |
|
| INVERSE/WHITE Start STAND BY | |||||
To select “ ON” for the “ WORKING TIME” ...
Set the hours of the working time to 0H and the minutes to 0M. “ON” will be displayed.
SCREEN WIPER
When this is set to ON, a white vertical bar moves repeatedly from the left end of the screen to the right end at a constant speed.
Example: Setting “SCREEN WIPER” to “ON”
Perform Steps 1-2 of LONG LIFE, then...
3.Use the ▲ and ▼ buttons to select “SCREEN WIPER”.
4.Use the and buttons to select “ON”.
The mode switches as follows each time the or button is pressed:
OFF ↔ ON
|
|
| LONG LIFE |
|
|
PLE | : | AUTO | |||
ORBITER | : | OFF | |||
INVERSE | : | OFF | |||
| SCREEN WIPER | : | ON | ||
|
|
|
|
| |
SOFT FOCUS | : | OFF | |||
|
| SEL. | ADJ. |
| RETURN |
|
| EXIT | |||
Information
SCREEN WIPER
ON ......... The white vertical bar appears.
You can set the time by pressing the MENU/ ENTER button while “ON” is set.
OFF ....... Screen wiper mode does not function.
Setting the time for SCREEN WIPER
Set a time duration and the speed.
Example: Setting to that the SCREEN WIPER mode starts in 30 minutes and proceeds for one hour and a half.
Perform Steps 1-3 of SCREEN WIPER, then...
4.Use the and buttons to select “ON”, then press the MENU/ENTER button.
THE “SCREEN WIPER” screen appears.
5.Adjust the time and speed using the ▲▼ and buttons. The mode switches as follows each time the or button is pressed:
• WORKING TIME
→ ON ↔ 00H03M ↔ 00H06M ↔ ..... ↔ 12H42M ↔ 12H45M←
• WAITING TIME
→ 00H03M ↔ 00H06M ↔ 00H09M ↔ ... ↔ 12H42M ↔ 12H45M←
• SPEED
→ | 1 ↔ 2 ↔ 3 ↔ 4 ↔ | 5← |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| SCREEN WIPER |
| |||
|
| WORKING TIME | : | 01H30M | |||
|
|
|
|
| |||
| WAITING TIME | : | 00H30M | ||||
| SPEED | : | 3 | ||||
SEL. | ADJ. | EXIT | RETURN |
43
