Runco PL-61CX Enabling/disabling the front panel controls, Information,  PWR. ON MODE settings

Information

PWR. ON MODE settings

LAST	Last mode (the mode that was last
	selected at the time the power was
	switched off).
VIDEO1, 2, 3 ....	VIDEO input mode.
RGB1, 2, 3	RGB input mode.
HD/DVD1, 2	HD/DVD input mode.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.

Example: Setting “ON”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

1.On the MAIN MENU, select “OPTION3”, then press the MENU/ENTER button.

The “OPTION3” screen appears.

2.Use the ▲ and ▼ buttons to select “CONTROL LOCK”.

3.To set the CONTROL LOCK to “ON”...

Use the  and  buttons to select “ON”, then press the MENU/ENTER button.

The mode switches as follows each time the  or  button is pressed:

OFF ↔ ON

			OPTION3		3 / 3
		PREVIOUS PAGE
TIMER
PWR. ON MODE				:	LAST
	CONTROL LOCK			:	ON
IR REMOTE				:	ON
LOOP OUT				:	OFF
ID NUMBER				:	ALL
VIDEO WALL
		SEL.	ADJ.		EXIT	RETURN

Information

CONTROL LOCK settings

ON ...... Disables the buttons on the front panel.

OFF .... Enables the buttons on the front panel.

*Even when the CONTROL LOCK is set, the POWER switch will not be locked.

*This becomes effective when the on-screen menu goes out.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Enabling/disabling remote control wireless transmission

This function enables/disables remote control wireless transmission.

Example: Setting “OFF”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

1.On the MAIN MENU, select “OPTION3”, then press the MENU/ENTER button.

The “OPTION3” screen appears.

2.Use the ▲ and ▼ buttons to select “IR REMOTE”.

3.To set the IR REMOTE to “OFF”...

Use the  and  buttons to select “OFF”, then press the MENU/ENTER button.

The mode switches as follows each time the  or  button is pressed:

OFF ↔ ON

			OPTION3		3 / 3
		PREVIOUS PAGE
TIMER
PWR. ON MODE				:	LAST
CONTROL LOCK				:	OFF
	IR REMOTE			:	OFF
LOOP OUT				:	OFF
ID NUMBER				:	ALL
VIDEO WALL
		SEL.	ADJ.		EXIT	RETURN

Information

IR REMOTE settings

ON ...... Enables remote control wireless transmission.

OFF .... Disables remote control wireless transmission.

Set “OFF” to avoid unwanted control from other remote controls.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

48