RP5030 EN(A ver.) 7/3/06 4:56 PM Page 11
Setting the Time
EN
Year/Date/12/24/Time
Setting
With this function, you can always read on the display the recording date and time of your recorded messages. Follow the steps below for time setting.
You can still use this unit for normal recording without setting the time. However, no correct recording date and time can be referred for your recorded messages.
1.Turn on the unit.
2.Press MENU repeatedly to enter Time setting mode.
3.When “YEAR” flashes, the digits of the year blinks
(default is 2006). Press REVERSE or FORWARD to increase/decrease the number, press MENU to confirm.
4.Once the year is entered , the digits in the month field
will blink (default is 1). Press REVERSE or FORWARD to increase/decrease
the number, press MENU to confirm.
5. Once the month is entered, the
digits in the day will blink(while the digits in the month field stop
blinking). Press REVERSE or |
|
| |
FORWARD to increase/decrease |
|
| |
the number, press MENU to |
|
| |
confirm. |
|
| |
6. Once the date is |
|
| |
entered, you can |
|
| |
choose between | AM | ||
12/24 hour clock |
|
| |
display by pressing |
|
| |
REVERSE |
|
| |
/FORWARD, then |
|
|
|
press MENU to confirm. |
|
| |
7. Once the time |
|
| |
format is entered, |
|
| |
the digits in the | AM | ||
hour field will blink (default setting is 12 (12 hour mode) & 0
(24 hour mode). Press REVERSE or FORWARD to increase/decrease the number, press MENU to confirm.
8.Once the hour field is entered, the digits in the minute field will blink. Press REVERSE or FORWARD to increase/decrease the number, press MENU to confirm.
Tip:
Press STOP to exit to
Stop mode.
6 
