Operation
Starting a process
Use the appropriate selector to choose the microwave power setting and the time. It does not matter which is chosen first.
^Turn the power selector to the re- quired setting.
h lights up in the display and 0:00 flashes.
^Set the required time using the time selector.
Any time of between 5 seconds and 60 minutes can be selected.
^Press the START button to start the process.
The interior lighting comes on.
A programme can only be started if the door is closed.
Interrupting a process /
Re-starting a process
Programmes can be interrupted and
^To interrupt a process, press the Stop/C button once or open the ap- pliance door.
The time stops counting down.
^To continue the process, close the door and press the START button.
The process continues.
Altering settings
If you discover after starting a process that
. . . the microwave power setting is too high or too low, you can
^select a new setting.
. . . the time set is too short or too long, you can
^interrupt the process (press the Stop/C button once), use the time se- lector to set a new time and continue the process (press the START but- ton).
To cancel a process
Press the Stop/C button twice.
At the end of a process
An audible tone will sound when the cooking process is complete. The oven interior lighting goes out.
22