Installation and connection
If the connection cable is damaged the new cable must be fitted by a Miele approved service technician.
Do not position the appliance too close to adjacent furniture.
A ventilation gap of at least 5 cm is required around the appliance. The ventilation gap above the appliance should be at least 14 cm.
When installing the appliance ensure there is sufficient ventilation under- neath and to the rear of the appli- ance.
Do not place any objects on the ven- tilation outlets or block the gap be- tween the base of the appliance and the worktop surface
The microwave oven can be:
–placed on a worktop.
–built into a tall unit or into a unit un- der a worktop using a suitable build- ing in frame*. The measurements given in its fitting instructions must be observed.
Exception: Appliances with a stain- less steel front must not be
*Available from your Miele Dealer or the Miele Spare Parts Department.
41