Sharp 60LE640U Watching TV, Turning On/Off the Power Initial Installation, Location & Time

Watching TV

Turning On/Off the Power		Initial Installation
		When you turn on the TV for the fi rst time, it will
	POWER	automatically memorize the broadcasting channels
		available in the region where you live. Perform the
		following steps before you press POWER on the
		remote control unit.
		1.	Insert the batteries into the remote control unit. (See page 9.)
		2.	Connect the antenna cable to the TV. (See page 9.)
		3.	Plug in the AC cord to the AC outlet. (See page 8.)

POWER (On/Standby)

Press POWER on the TV or on the remote control unit to turn the power on.

•For model LC-80LE633U, the control panel is located on the left side of the TV as seen from the front.

•The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Initial Setup menu on page 33.

Press POWER on the TV or on the remote control unit again to turn the power off.

•The TV enters standby and the image on the screen disappears.

•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

•Weak electric power is still consumed even when the TV is turned off.

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

1Press a/b to select the desired language listed on the screen, and then press ENTER.

Language
Location & Time
TV Location	English
Antenna & Cable/STB	Français
Air/Cable	Español
CH Search
Completed

Location & Time

Make settings for the country, area and time zone where you use the TV.

2Press a/b to select "United States", "Canada" or "Mexico", and then press ENTER.

United States

Canada

Mexico

17