Sharp 52LE640U, LC-52C640U, LC-60C640U, LC-70C640U, LC-80LE633U Entering Text Software Keyboard

Using the Internet

Entering Text (Software Keyboard)

When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard.

•You can enter up to 128 characters for text.

•Some special characters or diacritics may not be available depending on where you enter the text.

The text you enter is displayed as you type it in. To move the cursor (the current input position), use

“” or “” on the software keyboard.

Press c/d to select the type of characters entered: alphabet, number or sign.

(The selectable types depend on the input source.)

Enters a space.

While you are entering text, likely input conversion candidates are displayed based on what you typed in.

•You can also enter text by pressing A, B or C on the remote control unit.

Caps Off/Caps On/Caps Lock

If “alphabet” is selected in “Character Set”, this switches characters between uppercase and lowercase.

Each time you press ENTER, the character type switches as shown below:

Caps Off: all the characters are lowercased

Caps On: only the fi rst character is uppercased

Caps Lock: all the characters are uppercased

Done

Applies the entered information and closes the software keyboard.

Quit

Closes the software keyboard without applying the entered information.

•You can also close the software keyboard by pressing EXIT on the remote control unit.

Displays the icon “ ”, indicating that a new line has been inserted.

Clear

Erases the character string.

•When the cursor is somewhere in a line: the character string to the right of the cursor will be erased.

•When the cursor is at the right end of a line: the entire line will be erased.

Delete

If the cursor is at the right end of a line, this erases text one character at a time.

•You can also delete text by pressing RETURN on the remote control unit.

Buttons	Description
a	Moves the focus up. When the focus is at the top edge, this moves the focus to
	the opposite edge (bottom edge).
b	Moves the focus down. When the focus is at the bottom edge, this moves the
	focus to the opposite edge (top edge).
	Moves the focus left. When the focus is at the left edge, this moves the focus to
	the opposite edge (right edge).

cWhen the focus is on “Character Set”, this selects the character type (moving backwards).

When the focus is in an input box, this moves the cursor in the input box to the left. Moves the focus right. When the focus is at the right edge, this moves the focus to the opposite edge (left edge).

d	When the focus is on “Character Set”, this selects the character type (moving
	forwards).
	When the focus is in an input box, this moves the cursor in the input box to the
	right.
ENTER	Performs the processing for the button currently in the focus.
	Closes the software keyboard without applying the original input elements for the
EXIT	entered text.
	Erases the text in the input box where the cursor is currently located.
RETURN	When the cursor is at the end of a sentence, this acts as a backspace.
0-9	Directly enters the single-byte number for that button.
A (red)	Directly enters prediction candidate 1.
B (green)	Directly enters prediction candidate 2.
C (blue)	Directly enters prediction candidate 3.
D (yellow)	Enters a space.

60