Sharp R-25AM, R-23AM, R-22AM operation manual Installation Instructions, Accessories

6-5)Hold the mounting plate A to the rear cabinet of the oven A with the single screw (a), as shown in the figure A.

6-6)Remove the screw (a) holding the mounting plate B to the rear cabinet of the oven B. And remove the mounting plate B from the oven B. See the figure A.

6-7)Install the screw (a) to its position again.

6-8)Remove the screw (c) from the oven A.

6-9)Remove the screw (d) from the oven B.

6-10)Turn the removed mounting plat B over and then using the removed screw (c) and (d), attach the mounting plate B, as shown in the figure A.

WARNING:

NOTE

1.If you are unsure how to connect your oven, please consult an authorized qualified electrician.

2.Neither the manufacuture nor the dealer can accept any liability for damage to the oven or personal

injury resulting from failure to observe the correct electrical connection procedure.

3.Water vapour or drops may occasionally form on the oven walls or around the door seals and sealing surfaces. This is a normal occurrence and is not an indication of microwave leakage or a malfunction.

INSTALLATION INSTRUCTIONS

WARNING : Always keep the caution sheet (SPECIAL INSTRUCTIONS AND WARNINGS) close to the oven for your reference.

1) Remove all packing materials from the inside of the oven cavity. Remove all the blue protective film from the outside of the oven.

2) Check the oven carefully for any signs of damage.

3) Place the oven on a flat, level surface strong enough to support the oven's weight plus the heaviest item likely to be cooked.

Do not place this oven in a position which is not easily accessible. To position the oven too high can be dangerous because food can not be re- moved safely.

4) Ensure there is a minimum free space above the oven of 25 cm.

25 cm

5)Securely connect the plug of the oven to a standard earthed (grounded) household electrical outlet.

6)Two same oven models can be installed together by placing one on top of another. Follow these instructions.

6-1)Place the oven A and position the oven B on top of the oven A as shown in the figure A.

6-2)Remove the single screw (a) holding the mounting plate A to the rear cabinet of the oven A. And remove the mounting plate A.

6-3)Remove the single screw (b) from the rear cabinet of the oven B, as shown in the figure A.

6-4)Reinstall the mounting plate A to the rear cabinet of the oven B with the single screw (b) removed, as shown in the figure A.

In case where two ovens are installed together by placing one on top of another.

1)Use the two mounting plates for fixing the two ovens.

2)Make sure that the power supply cord is not caught between the two ovens.

3)Do not install more than one oven on top of another.

4)Do not lose the removed screws.

Screw (a)	Oven B
	Rear cabinet
Mounting Plate A
Screw (b)	Screw
	(d)
Screw (a)	Screw (c)
	Mounting Plate B
Oven A	Rear cabinet

Figure A: How to fix two ovens

ACCESSORIES

Check to make sure the following accessory is provided:

•Operation manual

•Caution Sheet (SPECIAL INSTRUCTIONS AND WARNINGS : part code TCAUHA429WRRZ, TCAUHA430WRRZ and TCAUHA445WRRZ)

NOTE:

•When you order accessories, please mention the two items : part name and model name to your dealer or SHARP authorized service agent.

•The model name is printed on the door of the microwave oven.

3