As the time to be set increases, the timer steps in larger increments (units), as shown on the table below. Ex. for
COOKING TIME SETTING UNIT
(For
COOK TIME | UNIT | |
0 | - 60 seconds | 2 seconds |
60 seconds - 3 minutes | 5 seconds | |
3 | - 10 minutes | 10 seconds |
10 - 30 minutes | 30 seconds | |
|
|
|
(For
COOK TIME | UNIT | |
0 | - 20 seconds | 2 seconds |
20 seconds - 1 minute | 5 seconds | |
1 | - 6 minutes | 10 seconds |
6 | - 15 minutes | 30 seconds |
15 - 30 minutes | 1 minute | |
|
|
|
OTHER CONVENIENT FEATURES
REPEAT COOK
Your oven can memorize the last cooking time in each power level. If you use this function, you have no need to enter the cooking time.
Example: Suppose you want to use this function at 100%. (The last cooking time is 10 min.).
POWER
/100% | % | ||
|
| ||
|
|
|
|
Choose | desired | Check the display. | |
power | level |
|
|
(100%). |
|
|
|
POWER
ON%
Start to cook. | Check the display. |
INFORMATION WITH ERROR MESSAGES
If ERROR messages are displayed, follow the below instructions.
ERROR MASSAGES
EE1,EE2,EE3, | Please contact your dealer or an authorized Sharp service agent because the oven |
EE6,EE10,EE16 | must be out of order. |
|
|
EE8,EE0 |
|
(For |
|
EE19 |
|
(For |
|
EE7 | Exhaust air temprature is too high. Checking that nothing is blocking the ventilation |
| openings or that room temperature is very hot or that oven cavity is empty during |
| operation. Correct and try again after a few minutes. |
|
|
EE17 | Magnetron temperature is too high, open and close the door twice, and then try again |
| after a few minutes. |
|
|
EE9 | The time you set exceeds a maximum time. Open and close the door twice, and |
(For | enter appropriate time. |
|
|
5