Miele 09 798 350 Interrupting or resuming a program, Cancelling a program, Changing the settings

Operation

Interrupting or resuming a program

At any time you can . . .

. . . interrupt a program:

^Press the "Stop/C" button, or open the appliance door.

The time stops counting down.

. . . resume a program:

^Close the door and press the "Start" button.

The program will continue.

Cancelling a program

^Press the "Stop/C" button twice.

At the end of a program

An signal will sound when the cooking program is complete. The oven interior lighting goes out.

As a reminder, the signal will sound briefly every 5 minutes for 20 minutes once the program is complete.

^If you wish to stop the signal, press the "Stop/C" button.

Changing the settings

After starting the program, if you determine that . . .

. . . the microwave power level is too high or too low:

^Select a new power level.

. . . the time entered is too short or too long:

^Interrupt the program (press the "Stop/C" button once), use the selector knob to set a new time, and resume the program (press the "Start" button),

or alternatively:

^Press the "Start" button during operation to increase the cooking time. Each push of the button increases the time by another minute. (Exception: The time increases by 30 seconds when the microwave oven is being used at maximum power.)

Automatic "Keep warm" function

The automatic keep-warm function will turn on automatically at 80 W for a maximum of 15 minutes approx. 2 minutes after the end of a cooking program that was run at a power level of least 450 W, provided that the door remains closed and no buttons are pressed.

h, 80 W and H:H will appear in the display.

Opening the door or operating one of the buttons or selectors while the auto- matic keep-warm function is in progress will cancel the function.

The automatic keep-warm function cannot be set as a separate function.

28