Setting the temperature
Temperature unit (Fahrenheit/Celsius)
The temperature can be displayed in degrees Fahrenheit (°F) or Celsius (°C).
^Touch the access button "p" so it turns yellow.
^Touch the sensor button for the refrigerator section so it turns yellow.
^Note the position of the button X, but do not touch.
^Touch the access button "p" again so it turns white.
Only the access button "p" is visible.
^Place one finger on the position of the X button and hold (the X button will not be visible).
^While holding down the X button, press the access button "p" once. Keep holding the X button down until the following appears in the display (approx. 5 seconds).
^Tap the X button until † appears in the display.
^Touch the access button "p" to confirm.
^By touching the X button you can select either Fahrenheit or Celsius for the temperature display.
†0: Fahrenheit
†1: Celsius
†
^Touch the access button "p" to confirm the setting.
^Tap the X button until a ; appears in the display.
^Touch the access button "p".
You have left the Custom settings mode.
When you are in the Custom settings mode the door alarm is turned off automatically. Once the door is closed it is reactivated.
15