Miele KF1801VI, KF1811VI, KF1911VI, KF1901VI Humidity filters, Aluminum frames

Page 30

Cleaning and care

Aluminum frames

The shelf frames are made of aluminum.

^Clean the frames with a mild solution of warm water and liquid dish soap.

Aluminum is susceptible to scratches and nicks, treat with care.

The aluminum frames may become discolored or otherwise altered if soiling is not cleaned away promptly.

Do not use stainless steel cleaners; lime removers; scouring pads, such as pot scrubbers; or used sponges that still contain abrasive cleanser residue to clean the frames.

Humidity filters

The two humidity filters, located above the SmartFresh drawers, must be removed for cleaning.

^Remove the SmartFresh drawer.

^Unhook the filter cover, 1. in each side of the drawer and remove them along with the filters downwards starting from 2.

^Clean the filters by rinsing them with lukewarm water.

Do not clean in a dishwasher or washing machine. This will damage the filter.

^Air-dry the filters.

^Place the filters back in the filter cover.

^Put the filter cover back in place, inserting the rear hooks first.

^Re-insert the SmartFresh drawer.

30

Image 30
Contents En US, CA Contents Contents Important Safety Instructions Electrical SafetyInstallation UseDisposal of your old appliance Guide to the Fridge-Freezer combination Control panel Before using for the first time Before useTurning the appliance On/Off Settings Using the settingsCustom settings Turning the button sound On/OffFunction Display text Turning off for longer periods of time Alarm Temperature alarmDoor alarm Setting the temperature Temperature rangeTemperature unit Fahrenheit/Celsius SmartFresh drawers Storage temperaturesUsing the SmartFresh drawers HumidityFoods that are best stored under dry conditions Foods that are best stored under moist conditionsWarmest area Using the refrigerator efficientlyDifferent storage zones Coldest areaUsing the freezer efficiently Freezing foodDefrosting Cooling drinks quicklySuperCool Switching on SuperCoolSwitching off SuperCool SuperCoolIce cube maker Turning on the ice cube makerTurning off the ice cube maker Automatic defrost Refrigerator section and SmartFresh drawersFreezer section Floating drawer Adjusting the interior fittingsMoving the shelves SmartFresh drawerReplacing the SmartFresh drawer Removing a door shelf Adjusting the door shelvesRemoving the storage shelf from above the drawer Replacing a door shelfReplacing the ice cube container Ice cube containerSmall freezer basket Replacing the small freezer basketLarge freezer basket with partition Replacing the partitionReplacing the large freezer basket Cleaning and care Before cleaningCleaning the interior and accessories Humidity filters Aluminum framesAfter cleaning Ventilation slitsDoor seals Changing the light bulb Upper lightingSide lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Filter Performance Data Sheet Water Treatment Device Certificate NumberPerformance Data Sheet For Filter Model Frequently asked questions Freezer section will not ApplianceDoor to OpenFilter display is red Alarm indicator isFlashing Filter display isWill not switch on Is not producing anyIce cubes An unpleasant SmallIce cubes have Odor/flavorMisshapen Producing enough iceOr the ice cubes are Ice is formingSssrrrrr Blubb, blubbClick Rattling, vibratingAfter sales service MieleCarePage Installation instructions Caring for the environment Disposal of packing materialsDisposal of an old appliance Installation Installation siteEmpty weight of your machine Furniture/fixtures Installation nicheBase VentilationInstallation options Custom door panelsSide panels With partitionFront panel gap kit optional accessory Dimensions Niche dimensionsDoor dimensions open min Before you begin Installing the applianceTools needed for installation OtherCheck the installation niche Before installationRemoteVision module installation Preparing the installation niche Anti-tip brackets Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Installing the appliance Preparing the custom door Installing the appliance Attaching and aligning the custom door front Attaching the lower bracket Attaching the covers Attaching the toe-kick panel Mounting the air separator Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision Accessing the RemoteVision control panel Status indicators Description of function MasterCool control panel options for RemoteVisionSelectable Description of function Options Page