Installing the appliance
Attaching and aligning the custom door front
^Fit the door handle to the custom door.
Note that the screws are applied from the reverse side.
^Open the door and hang the custom door with the adjusting rail over the
^Screw the nuts q a few turns onto the
^Close the door.
^Adjust the custom door to adjacent furniture/fixtures.
^Align the custom door with the
^Tighten the nuts on the adjusting rail. This will correct the side alignment of the door.
^Put the side strips o back into place and screw them completely down on both sides of the appliance door.
^Align the custom door again as needed and tighten all screws on the sides.
To mount the custom door on the lower appliance door, simply repeat the steps under "Preparing the custom door".
^The position of the lower furniture door depends on the position of the upper door.
70