ENGLISH
11
CAUTIONS ON USE
2Place of use
Do not drop or subject to strong shocks. Doing to could result in damage.
2Handling
The touch panel (display) is made of glass. Do not apply pressure to it, drop the set, lean on the touch panel with your elbows or place heavy objects on it. Doing so could break the touch panel and the fragments of glass could cause injury.
2Cleaning
Use a soft cloth to wipe dirt off the touch panel (display), the surface of the case and the buttons. Do not use thinner, benzene, alcohol, etc., as they could damage the surface.
12
TROUBLESHOOTING
If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
Disconnect the power immediately and contact your store of purchase.
Symptom |
| Cause |
|
| Measures |
|
| |
|
|
|
|
|
|
|
| |
Operation is not possible. | • | The unit is too far from the amplifier. | • Move | the | unit closer | to | the | |
|
|
|
| amplifier (within 7 meters) when | ||||
|
|
|
| operating it. |
|
|
| |
| • | There is an obstacle between the | • | Remove the obstacle. |
|
| ||
|
| unit and the amplifier. |
|
|
|
|
|
|
| • The amplifier’s power is not on. | • Turn on the amplifier’s power. |
| |||||
| • The transmitter is not pointed at the | • Point | the | transmitter | at | the | ||
|
| amplifier. |
| amplifier. |
|
|
| |
| • There is an inverter type fluorescent | • Move | the | unit and the | amplifier | |||
|
| light near the unit or the amplifier. |
| away from the fluorescent light. |
| |||
| • You are using products of other | • Depending on the manufacturer and | ||||||
|
| brands. |
| type of product, it may not be | ||||
|
|
|
| possible to operate product with | ||||
|
|
|
| this unit. |
|
|
| |
|
|
|
|
| ||||
Liquid crystal display does | • | The panel is turned off. | • | Touch the touch panel or press the | ||||
not turn on. |
|
|
| LIGHT button. If LCD is still not | ||||
|
|
|
| displayed, press the RESET button. | ||||
|
|
|
| (See page 4.) |
|
| ||
| • The brightness is not properly set. | • | Refer to “Adjusting the brightness | |||||
|
|
|
| of the liquid crystal display” (see | ||||
|
|
|
| page 4) and adjust the brightness of | ||||
|
|
|
| the liquid crystal display. |
|
| ||
|
|
|
|
|
| |||
Touch panel cannot be | • | Touch panel adjustment is off. | • Adjust the touch panel. |
|
| |||
operated accurately. |
|
|
| (See page 5.) |
|
| ||
|
|
|
|
|
|
|
|
|
33