Denon RC-8000 manual Rf Transmission Function, Factory Default Settings, Specifications, English

ENGLISH

e Once the button is successfully learned, the preset memory search	Screen e
operation starts.
Once the search operation is successfully completed, a list of the preset
memory codes is displayed.
Select the code and check that the device operates properly.
Continue the procedure as described in section “Changing the preset
memory of preset devices” on page 12.

NOTES:

• If the corresponding preset memory is not found with the search operation, “NONE” is set automatically.

• A manufacturer (brand) other than the manufacturer (brand) of your remote control unit may be displayed. If the remote control unit works with the displayed manufacturer’s codes, use it as such, without worrying about the name of the manufacturer.

8

RF TRANSMISSION FUNCTION

RF transmission is possible when the RC-8000 is used in combination with the separately sold RC-8001ST charger base station.

For instructions, refer to the RC-8001ST’s operating instructions.

9

FACTORY DEFAULT SETTINGS

Registered device:	AVAMP, TUNER, TV, DVD, VCR, CD, CDR, TAPE, SYS. CALL, SETUP
LCD off (LCD) time:	10 seconds
Back light off (Light) time:	5 seconds
Sound setting (Sound):	ON

10

SPECIFICATIONS

Dimensions:	96 mm (width) x 38 mm (height) x 168.5 mm (depth)
	(3-25/32” x 1-1/2” x 6-41/64”)
Mass:	242 g (8.5 oz) (not including batteries)
Battery service life:	Approx. 3 months (under standard usage conditions)
Distance:	Approximately 7 meters (22 feet)
Angle:	Up to 30 degrees
Accessories:	LR6 (AA size) alkaline batteries	. . . .4
	Operating instructions	. . . .1
	Service station list	. . . .1
	Warranty *	. . . .1

*When the RC-8000 is acquired as an accessory included with the AVR-5800, there is no separate warranty for the RC-8000. (The warranty is only for the AVR-5800.)

✽For purposes of improvement, specifications and design are subject to change without notice.

32