Denon RC-8000 Operating devices for which the preset memory is set, TV preset memory buttons

ENGLISH

[3]Operating devices for which the preset memory is set

For details, refer to the individual devices’ operating instructions.

Note that some devices and some buttons may not be operable.

If this case, use the learning function to store the device’s remote control signals in the RC-8000.

q Press an icon in the icon display section to select the device to be operated.

w Use the and buttons in the page display section to display the page on which the button you want to operate is located.

e Press the button you want to operate to send its remote control signal.

•The displayed button names are the same as the default button names.

•The button names for buttons from which signals can be transmitted are displayed in black characters.

•The button names for buttons at which no transmission codes are set are displayed in gray characters.

•No transmission codes are set for buttons which do not have button names.

NOTES:

•The signals registered at the buttons (the presence or absence of transmission codes) depend on the preset code which has been set.

•If the contrast is strong, it may be difficult to read gray characters. If this is the case, adjust the contrast so that gray characters are easier to read.

The names of buttons on the devices you are operating with the RC-8000 may differ from the names of the buttons on the RC-8000. If so, the names can be changed for greater ease using the procedure described in section “Changing the button names” (page 30).

2 TV preset memory buttons

Transmission codes

of independent buttons

CH• : TV channel

CHª : TV channel

VOL• : Main volume of AV amplifier

VOLª : Main volume of AV amplifier

MUTE : Muting of AV amplifier

2 DVD (DVD player and DVD changer) preset memory buttons

14